|Subject:||Re: [Paparazzi-devel] New Autopilot hardware for 16 Euros|
|Date:||Tue, 27 Nov 2012 21:42:34 +0000|
HUmmm nice to hear about PTH problem.
I not use this regulator on my boards.
I use an "ADAPTATION" jejejej
I ever use a external BEC.
when i assembled my first twog the PTH was burn after a short circuit then i never used this module.
BTW ... i found my first attempt to run a rotorcraft code on lisa_m.
its an adaptation using UNIVERSAL stm32 OLIMEX BOARD and tons of cables.
it worked but i used only 4 times. and only for tests.
Date: Tue, 27 Nov 2012 22:33:09 +0100
Subject: Re: [Paparazzi-devel] New Autopilot hardware for 16 Euros
Thank your for the answer.
My question was more related to the possibility to do it !
It is good to hear the word "Reliability" :) some months ago I tried to collect informations about AP boards reliability ! because I had bad experience with some PTH08080WAH ship. It would be nice it there is a statistical study to analyse the path of failure of the AP !
On Tue, Nov 27, 2012 at 10:16 PM, Eduardo lavratti <address@hidden> wrote:
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
|[Prev in Thread]||Current Thread||[Next in Thread]|