[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Lisa/L Vendors

From: Piotr Esden-Tempski
Subject: Re: [Paparazzi-devel] Lisa/L Vendors
Date: Tue, 13 Nov 2012 16:05:25 -0800

Hi Gareth,

You are definitely not the first person asking for Lisa/L. As I said before on 
this list I don't think this is the right way to go. I think going the 
direction of modularity is a much better approach.
That is why we are working on this should add at least 
the needed computation power to the lisa/m or lia autopilots. If you have some 
ideas requirements for that expansion board please feel free to share them. :)

I would just start bringing up your system using lisa/m or lia and when the 
expansion board is there add the power needed? I hope this helps. :)

Cheers Piotr

P.S. For servo connectors you can use Molex CGrid instead of the normal servo 
headers for improved rigidity.

Transition Robotics Inc.
the makers of the Quadshot
Co-Founder, Embedded systems Engineer

On Nov 12, 2012, at 11:11 AM, Gareth Roberts <address@hidden> wrote:

> Hi all,
> We are looking at getting some Lisa/L boards made up for some new aircraft, 
> we need about 5 boards.
> - Does anyone know of any vendors who have stock (I suspect no)?
> - Is anyone flying Lisa/L 1.1 boards?
> - Has anyone tried the STM32 autopilots with an XSens IMU?
> - Would anyone be interested in getting a bigger batch and splitting them?
> Cheers,
> Gareth
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]