|From:||Christophe De Wagter|
|Subject:||Re: [Paparazzi-devel] YAPA UART?!|
|Date:||Mon, 5 Nov 2012 10:01:31 +0100|
Could you please attach the picture and name the exact model of XBee you are using.
There are at least 5 types of digi.com Xbee's that I have tested on to all versions of yapa without reversed polarity and to my knowledge all xbee have the same pin out, as well as GPS-bee's and bluetooth-bee's which all fit so I am interested to understand how you come to these conclusions.
Please do understand however that the LPC-Rx pin connects to the Xbee-Tx and vice versa, and that the Rx of your PC should connect to the Tx of yapa, as is common is UART communications. Look at the arrows in the schematics to be sure.
At last I succeeded to connect my YAPA V2 with GCS , but I find a big problem!
I tried to connect YAPA with my Xbee but every time it didn't work, I
tried all of way but there wasn't any result! next I tried with RS232
(like my attached picture) but result was same as Xbee. At last I
start some infatuated test! I find YAPA V2 Tx&Rx is reversed.!!!! this
is really painful for me because not only RS232 but also Xbee
connector is reversed!!!!
Now I'm using that with reverse Tx&Rx . I think it's better to
redesign it or it's a good idea if we have a switch on board for
Thanks a lot..............Iman
Paparazzi-devel mailing list
|[Prev in Thread]||Current Thread||[Next in Thread]|