Re: [Paparazzi-devel] Macports install of paparazzi failing

[Chris Wozny]

Chris,

I know I was racking my brain a few months ago as to why mine wouldn't
work until I realized I hadn't done a "make clean" before my "make".
That solved my problems.

- Chris

On Wed, Jun 27, 2012 at 4:42 PM, Chris Robson
<address@hidden> wrote:
> Hi again,  I did reply to you Bernie about getting it working, but I've come
> up against another hurdle.
>
> Steps I have taken:
> installed paparazzi tools with macports
>
> downloaded the source code from github
>
> tried the make command, which results in this:
>
> OC gen_aircraft.ml
> File "gen_aircraft.ml", line 1, characters 0-1:
> Error: Error on dynamically loaded library:
> /opt/local/lib/ocaml/dllivy-ocaml.so:
> dlopen(/opt/local/lib/ocaml/dllivy-ocaml.so, 138): Symbol not found:
> _IvyBindMsg
>   Referenced from: /opt/local/lib/ocaml/dllivy-ocaml.so
>   Expected in: flat namespace
>  in /opt/local/lib/ocaml/dllivy-ocaml.so
> make[1]: *** [gen_aircraft.out] Error 2
> make: *** [tools] Error 2
> mmmacbook:paparazzi chrisrobson$
>
>
> Any help is greatly appreciated
> Chris
>
>
> On 27 Jun 2012, at 08:39, Bernard Davison wrote:
>
> Have you tried the binary install? Or do you need to use MacPorts for some
> other reason?
>
> You only need to install paparazzi-tools.
> I'd ignore the paparazzi port since it hasn't been looked at for quite a
> while.
> I'll take a look now (and probably remove it)
>
> Cheers,
> Bernie.
>
> On 27/06/2012, at 4:46 PM, Chris Robson wrote:
>
> Hi everyone,
>
> I tried installing paparazzi on my mac via macports.  Every time I get the
> same error, I have attached the main.log file.  I followed these steps:
> <main.log>
> The tools that are required to work with paparazzi on a Mac are installed
> from MacPorts. All of the commands are given by terminal commands, please
> open your terminal first.
> In case you already have MacPorts installed, it is advised to run the
> following steps before proceeding:
>
> check that /opt/local/bin is the first entry in your PATH, easy to check by
> giving the following command
>
> env
>
> Then give the following command to make sure your ports are up-to-date
>
> sudo port selfupdate && sudo port upgrade outdated
>
> ..great,
>
> you now can run the installation steps starting from step 3 below.
>
> Edit the file
>
> /opt/local/etc/macports/sources.conf
>
> and above the
>
> rsync://...
>
> line add
>
> rsync://rsync.paparazziuav.org/macports/ports/
>
> It is important that this line comes before the path to the standard ports
> as some of the Paparazzi ports are intended to replace the standard
> versions. The file is write protected so it will be necessary to be root in
> order to edit it. The simplest way is to open a terminal window and use nano
> thus:
>
> sudo nano /opt/local/etc/macports/sources.conf
>
> Now update the available ports with the command:
>
> sudo port selfupdate
>
> If you do not have your own copy of the paparazzi source then you now need
> to install paparazzi:
>
> sudo port install paparazzi
>
> OR if you do already have your own copy of the paparazzi source and you want
> to keep in then the tools required by paparazzi can be installed with the
> command
>
> sudo port install paparazzi-tools
>
> ...Then go and have lunch, get a coffee, get some sleep. This will probably
> take a long time.
>
>
> When this didn't work I tried
>
> sudo port -f uninstall installed
>
> sudo port clean --all uninstalled
>
> sudo port selfupdate
>
> sudo port install paparazzi-tools
>
> or
>
> sudo port install paparazzi
>
>
> I still get the same error.  I have OSX 10.6.8, Xcode 3.2.6.
>
> Any help with this would be greatly appreciated.
>
> Chris