Re: [Paparazzi-devel] NewUserProblem: Flashing to Lisa/M on MacOSX 10.7.4 --> "No module named usb"

[Stephen Dwyer]

Hi Andreas,

You are indeed missing the PyUSB library. There has been some
discussion about the best way to include this in the Paparazzi binary
install for OS X.

Could you give some more details about your setup? Do you use Macports
or a similar system ( I assume you do)? What method did you use to try
and install py26-pyusb, py26-scipy, python_select? What is your PATH
env var set to? What python(s) do you have?

If you are using Macports, you can install python 2.6 and py26-pyusb
or alternatively, python 2.7 and py27-pyusb-devel, after which you
will probably have to select which python is the default by running.
To find out what pythons you have installed, run:
port select --list python
To select which python is active/default:
sudo port select --set python python2X
where X is 6 or 7.

If you aren't running Macports or a similar system (I am not sure how
to configure homebrew or fink), you can try and install pyusb into the
default apple python (again, I am not sure how to do that).

I will try to update the wiki documentation on this soon.

Hope that helps.

Thanks,
-Stephen Dwyer

On Sat, Jun 9, 2012 at 12:47 PM, Andreas Jaensch <address@hidden> wrote:
> Hi,
>
> I am a new paparazzi user.
>
> I managed to get most of the setup to work, but unfortunately but I am not
> able to flash anything to the Lisa/M board via USB on a Mac running OSX
> 10.7.4.
>
> I might missing a driver or a PyUSB library.
> The status LEDs are cycling up and down.
>
> Any ideas?
> Any help appreciated!
>
> Thanks a lot,
>
> Janosch
>
> I tried to find a solution here:
> http://paparazzi.enac.fr/wiki/Installation/MacOSX
> http://paparazzi.enac.fr/wiki/Installation/MacOSX#USB_Drivers_for_Telemetry
> --> The FDTI Drivers are already installed
> http://lists.gnu.org/archive/html/paparazzi-devel/2012-05/msg00019.html
>
> I also tried:
> https://github.com/paparazzi/paparazzi-portability-support/commit/f0d01623b57e5014b600c244a2157a3352042c06
>  --> I also installed: py26-pyusb, port:py26-scipy, python_Select
>
> --> no success
>
>
> Trying to upload a compiled program I am receiving this Error Message:
>
> cd sw/airborne; make
> PAPARAZZI_SRC=/Users/ajaensch/Documents/GIT-Root/Paparazzi
> PAPARAZZI_HOME=/Users/ajaensch/Documents/GIT-Root/Paparazzi TARGET=test_led
> upload
> Using stm32 mem dfu loader
> /usr/bin/python
> /Users/ajaensch/Documents/GIT-Root/Paparazzi/sw/tools/dfu/stm32_mem.py
> /Users/ajaensch/Documents/GIT-Root/Paparazzi/var/setup_lisam2/test_led/test_led.bin
> Traceback (most recent call last):
>   File
> "/Users/ajaensch/Documents/GIT-Root/Paparazzi/sw/tools/dfu/stm32_mem.py",
> line 24, in <module>
>     import usb
> ImportError: No module named usb
> make[1]: *** [upload] Error 1
> make: *** [test_led.upload] Error 2
>
>
> All my USB devices are listed using " system_profiler SPUSBDataType ", Lisa
> M is found
>
> $ system_profiler SPUSBDataType
>
> USB:
>
>     USB High-Speed Bus:
>
>       Host Controller Location: Built-in USB
>       Host Controller Driver: AppleUSBEHCI
>       PCI Device ID: 0x0d9d
>       PCI Revision ID: 0x00a2
>       PCI Vendor ID: 0x10de
>       Bus Number: 0x24
>
>         Built-in iSight:
>
>           Product ID: 0x8507
>           Vendor ID: 0x05ac  (Apple Inc.)
>           Version: 4,35
>           Serial Number: 8JA4J2EAUDCLNA00
>           Speed: Up to 480 Mb/sec
>           Manufacturer: Apple Inc.
>           Location ID: 0x24600000 / 2
>           Current Available (mA): 500
>           Current Required (mA): 500
>
>     USB High-Speed Bus:
>
>       Host Controller Location: Built-in USB
>       Host Controller Driver: AppleUSBEHCI
>       PCI Device ID: 0x0d9d
>       PCI Revision ID: 0x00a2
>       PCI Vendor ID: 0x10de
>       Bus Number: 0x26
>
>         Internal Memory Card Reader:
>
>           Product ID: 0x8403
>           Vendor ID: 0x05ac  (Apple Inc.)
>           Version: 98,33
>           Serial Number: 9833
>           Speed: Up to 480 Mb/sec
>           Manufacturer: Apple
>           Location ID: 0x26100000 / 2
>           Current Available (mA): 500
>           Current Required (mA): 500
>
>     USB Bus:
>
>       Host Controller Location: Built-in USB
>       Host Controller Driver: AppleUSBOHCI
>       PCI Device ID: 0x0d9c
>       PCI Revision ID: 0x00a1
>       PCI Vendor ID: 0x10de
>       Bus Number: 0x04
>
>         Lisa/M (Upgrade) V1.0:
>
>           Product ID: 0xdf11
>           Vendor ID: 0x0483  (STMicroelectronics)
>           Version: 2,00
>           Serial Number: LM2-056 XXXXXXXXXXXXXXXXXXXXXXX
>           Speed: Up to 12 Mb/sec
>           Manufacturer: Transition Robotics Inc.
>           Location ID: 0x04100000 / 2
>           Current Available (mA): 500
>           Current Required (mA): 100
>
> …..and some more USB devices….
>
> $ ls /dev/tty*
>
>
> /dev/tty /dev/ttyr9 /dev/ttyu3
> /dev/tty.AndysNokiaE51-DataTrans /dev/ttyra /dev/ttyu4
> /dev/tty.AndysiPhone-WirelessiAP /dev/ttyrb /dev/ttyu5
> /dev/tty.Bluetooth-Modem /dev/ttyrc /dev/ttyu6
> /dev/tty.Bluetooth-PDA-Sync /dev/ttyrd /dev/ttyu7
> /dev/tty.CanoniP100Bluetooth-COM /dev/ttyre /dev/ttyu8
> /dev/ttyp0 /dev/ttyrf /dev/ttyu9
> /dev/ttyp1 /dev/ttys0 /dev/ttyua
> /dev/ttyp2 /dev/ttys000 /dev/ttyub
> /dev/ttyp3 /dev/ttys001 /dev/ttyuc
> /dev/ttyp4 /dev/ttys002 /dev/ttyud
> /dev/ttyp5 /dev/ttys003 /dev/ttyue
> /dev/ttyp6 /dev/ttys004 /dev/ttyuf
> /dev/ttyp7 /dev/ttys1 /dev/ttyv0
> /dev/ttyp8 /dev/ttys2 /dev/ttyv1
> /dev/ttyp9 /dev/ttys3 /dev/ttyv2
> /dev/ttypa /dev/ttys4 /dev/ttyv3
> /dev/ttypb /dev/ttys5 /dev/ttyv4
> /dev/ttypc /dev/ttys6 /dev/ttyv5
> /dev/ttypd /dev/ttys7 /dev/ttyv6
> /dev/ttype /dev/ttys8 /dev/ttyv7
> /dev/ttypf /dev/ttys9 /dev/ttyv8
> /dev/ttyq0 /dev/ttysa /dev/ttyv9
> /dev/ttyq1 /dev/ttysb /dev/ttyva
> /dev/ttyq2 /dev/ttysc /dev/ttyvb
> /dev/ttyq3 /dev/ttysd /dev/ttyvc
> /dev/ttyq4 /dev/ttyse /dev/ttyvd
> /dev/ttyq5 /dev/ttysf /dev/ttyve
> /dev/ttyq6 /dev/ttyt0 /dev/ttyvf
> /dev/ttyq7 /dev/ttyt1 /dev/ttyw0
> /dev/ttyq8 /dev/ttyt2 /dev/ttyw1
> /dev/ttyq9 /dev/ttyt3 /dev/ttyw2
> /dev/ttyqa /dev/ttyt4 /dev/ttyw3
> /dev/ttyqb /dev/ttyt5 /dev/ttyw4
> /dev/ttyqc /dev/ttyt6 /dev/ttyw5
> /dev/ttyqd /dev/ttyt7 /dev/ttyw6
> /dev/ttyqe /dev/ttyt8 /dev/ttyw7
> /dev/ttyqf /dev/ttyt9 /dev/ttyw8
> /dev/ttyr0 /dev/ttyta /dev/ttyw9
> /dev/ttyr1 /dev/ttytb /dev/ttywa
> /dev/ttyr2 /dev/ttytc /dev/ttywb
> /dev/ttyr3 /dev/ttytd /dev/ttywc
> /dev/ttyr4 /dev/ttyte /dev/ttywd
> /dev/ttyr5 /dev/ttytf /dev/ttywe
> /dev/ttyr6 /dev/ttyu0 /dev/ttywf
> /dev/ttyr7 /dev/ttyu1
> /dev/ttyr8 /dev/ttyu2
>
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>