[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Lisa/L test program

From: Stephen Dwyer
Subject: Re: [Paparazzi-devel] Lisa/L test program
Date: Thu, 19 Apr 2012 10:44:33 -0600


Knowing what compilation errors you are getting, as well as airframe
file configuration and what code (i.e. github branch and last commit)
you are using would be particularly helpful in identifying the problem

-Stephen Dwyer

On Thu, Apr 19, 2012 at 10:41 AM, Xavier RIVIERE
<address@hidden> wrote:
> Hi,
> I'm working on a homemade soldering Lisa/L, and I'm testing each fonction.
> FTDI and USB part is working well, and I can program the STM32. So I did.
> I run lisa/l some test programs for lisa :
> - test_LED
> - test_UART
> - test_baro
> But for "test_telemetry" and "test_actuators_mkk", I have compilation
> errors...
> My problem is that when I try to compile the complete software, I don't have
> any communication between the ARM and the Xbee. GCS remain blank, and when I
> check with an oscilloscope, there is no signal passing on the line.
> Any idea ??
> To be complete, I have to say that I don't have any IMU connect yet. Maybe
> the problem come from that ?
> Thanks
> Xavier
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]