[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Strange issue with Booz IMU v1.01 and the latest Git c

From: David Conger
Subject: [Paparazzi-devel] Strange issue with Booz IMU v1.01 and the latest Git code
Date: Sun, 18 Mar 2012 15:46:39 -0700

Hi Everyone,

I see a new strange issue with the Git code that does not exist with the SVN 
code (paparazzi3). 

When I use "RAW" messages the single-axis MAG does not report anything using 
the latest dev and main branches from GIt. 

However if I use paparazzi3 branch all is fine. 

Anything I should try? To debug where the single axis sensor is failing to 
register on SPI or ? 

Booz IMU v1.01 (airframe file I use: b2_v1.1) 
Booz Main (airframe is identical to conf/airframes/Poine/booz2_a1.xml except I 
modify b2_v1.0 to b2_v1.1) 
Communication is via FTDI adapter and USB/Serial 57k
I've used Linux and Mac OSX versions of Paparazzi. Actually for the paparazzi3 
branch testing I'm on Ubuntu. But I have used the Git on Ubuntu with the latest 
master and see the issue there. 

Best regards,
David Conger

reply via email to

[Prev in Thread] Current Thread [Next in Thread]