[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Lisa/M LED Guide?

From: Chris Wozny
Subject: Re: [Paparazzi-devel] Lisa/M LED Guide?
Date: Mon, 23 Jan 2012 17:04:39 -0700

Ahh, perfect.

Are we to configure the LEDs in the makefile
(paparazzi/conf/boards/lisa_m_1.0.makefile) or is this something that
has been abstracted to the airframe configuration XML? Also, if it
should be configured via the makefile, should the fields be 1-4
instead of "none"?

- Chris

On Mon, Jan 23, 2012 at 3:50 PM, Felix Ruess <address@hidden> wrote:
> Hi Chris,
> The orange one is the power led, so it's on as soon as the board has power.
> The red one is the sys_time led, so it should blink with 1Hz.
> From the top of my head the blue one doesn't indicate anything so far
> (in the master branch).
> The dev branch contains some fixes and improvements for the leds, you
> can configure what the leds should indicate.
> E.g. gps fix, ahrs aligner lock, radio control status, etc.... but the
> orange led is always the power led.
> Cheers, Felix
> On Mon, Jan 23, 2012 at 11:25 PM, Chris Wozny <address@hidden> wrote:
>> All,
>> Does anyone have a reference guide for what all of the LEDs mean on
>> Lisa/M? I see blue constantly on, red flashing every second, and
>> orange always on. I checked the wiki and the mailing list archive to
>> no avail.
>> - Chris
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden

Chris Wozny
ASUA Safe Ride
Administrative Director
Email: address@hidden
Office: 520-621-7233
Cell: 617-921-5679

reply via email to

[Prev in Thread] Current Thread [Next in Thread]