Re: [Paparazzi-devel] Lisa PCB pool

[Piotr Esden-Tempski]

Hi,

All the Lisa/L that we have are already needed for Kopi Luwak Quadshots people 
pledged for on Kickstarter. We are not planning to do a batch of Lisa/L at the 
moment. It's BOM is just prohibitively high for a young startup that we are. We 
hope to be able to revisit that after Lisa/M 2.0, Lia, Aspirin 2.0 and 
Quadshot's are in full production.

I personally have a long list of improvements and changes that I would like to 
introduce on that board. So I was hoping that I will have time, after the other 
things are rolling, to re-spin the board, as I did with Lisa/M 2.0, and Aspirin 
2.0 based on my experiences with those boards in the past.

I am glad Eric made a PCB Pool run of those boards I hope it works out. But if 
you have ideas how we can improve the access to Lisa/L earlier then our current 
schedule, please feel free to share them. 

Cheers Esden

--
Transition Robotics Inc.
http://transition-robotics.com
the makers of the Quadshot
Co-Founder, Embedded systems Engineer
Mobile: +1 831 440 7454
Skype: esdentem

On Jan 24, 2012, at 12:17 AM, Jochen Rieger wrote:

> In the end of february, do you know Lisa/L is also available in the quadshot 
> shop?
> 
> Best regards.
> Jochen
> 
> 2012/1/23 Piotr Esden-Tempski <address@hidden>
> Heya!
> 
> Which lisa boards are you planning to pool? We already produced the Lisa/M 
> 2.0 boards. We are currently sourcing the parts. If you are interested in the 
> challenge of assembling the boards yourself we can provide you with those 
> instantly. I just did not think anyone wanted to assemble them themselves. :)
> 
> The fully assembled boards should be available in http://thequadshot.com by 
> end of February.
> 
> Cheers Esden
> 
> --
> Transition Robotics Inc.
> http://transition-robotics.com
> the makers of the Quadshot
> Co-Founder, Embedded systems Engineer
> Mobile: +1 831 440 7454
> Skype: esdentem
> 
> On Jan 23, 2012, at 6:15 AM, Tilman Baumann wrote:
> 
> > On 23/01/12 14:12, Eric BAHIER wrote:
> >> Hi,
> >>
> >> I have make of  run Lisa board in PCBpool, I will solder it probably thus 
> >> week.
> >> I will let to know the progress.
> >
> > Awesome. Count me in as interested if you have one too much.
> >
> > Cheers
> > Tilman
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

signature.asc
Description: Message signed with OpenPGP using GPGMail