[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] tiny camera questions

From: Felix Ruess
Subject: Re: [Paparazzi-devel] tiny camera questions
Date: Wed, 18 Jan 2012 23:20:11 +0100

Hi Ana,

The CAM_SW is just a normal gpio, but is intended for e.g. switching a
video camera on and off.
You can use CAM_SWITCH_LED to switch the gpio....

The AUX pin outputs the 5V from the internal rail, but you can switch
it on and off (with POWER_SWITCH_LED).
If you add the settings file switch.xml you get two buttons in the
strip to turn it off and on.

Cheers, Felix

On Mon, Jan 16, 2012 at 2:08 PM, GARCIA ALVAREZ, ANA
<address@hidden> wrote:
> Hi all,
> I’m asking some questions about the tiny board camera conector.
> -How does the CAM SW function? (is it related to any feature? Should it
> receive a signal from the autopilot? What could it control?)
> -What about the AUX pin? Is it to connect an external source(a bat) to
> supply the 5v rail or is it to become a power status signal?
> And finally, I have read in the wiki about using an overo with a twog. Any
> recommendation/experience?
> Thanks and sorry for so many questions.
> Ana
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]