[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Startup issue with Lisa/M

From: Christoph Niemann
Subject: Re: [Paparazzi-devel] Startup issue with Lisa/M
Date: Tue, 03 Jan 2012 19:55:14 +0100
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv: Gecko/20111110 Icedove/3.0.11

Hi Eduardo,

thank you for your reply. I have the following define for the kill-switch:
      <define name="RADIO_KILL_SWITCH" value="RADIO_CAM"/>
The CAM switch is a two point switch on my radio.
If I activate it, the mode changes from "ATT" to "KILL". But the Motor even don't start when kill is deactivated.



On 03.01.2012 19:36, Eduardo lavratti wrote:
How many channels have your radio ?
Your KILL switch are ON.
With spektrum radio the KILL are the channel number 5.

Look ate radio config file and change the KILL channel if necessary.

> Date: Tue, 3 Jan 2012 19:14:20 +0100
> From: address@hidden
> To: address@hidden
> Subject: [Paparazzi-devel] Startup issue with Lisa/M
> Hi everyone and a happy new year!
> I'm currently trying to get a Lisa/m to run. Everything is fine so far,
> I managed to get it to run, also with my PPM-RC. But now I have a
> problem: I can't get the motors to run (not really the motors , I have
> none attached, I'm just watching the throttle gauge in the GCS and think
> it should show something different than 0%, once the motors run).
> I tried the usual startup-sequence, holding down the throttle and push
> yaw to max. The problem I see is that "kill_throttle" is "Kill" and once
> I set it to resurrect, it switches to kill again after approx 30 secs.
> Currently I don't have a GPS attached, so I have no fix. Could this be
> the problem? Looking at the code it seems unlikely.
> I guess this is a noobish question, but every help would be appreciated.
> Cheers
> Christoph
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
_______________________________________________ Paparazzi-devel mailing list address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]