[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Lisa M wiring layout

From: Stephen L Hulme
Subject: [Paparazzi-devel] Lisa M wiring layout
Date: Mon, 2 Jan 2012 12:38:32 +1300

Hi Bruzzlee
I forgot to append this working bench test photo of the lisa/m funjet wiring diagram.
On; Mon, 2 Jan 2012 11:44:05 +1300, Stephen L Hulme wrote:
Hi Bruzzlee
Please look at this rough pencil drawing of a lisa/m wiring diagram for a funjet.- this would be more useful for actual flying.
It can easily be extended to four motors.rather than the depicted servos. 
Note the positive from the 11.1 volt lipo is connected to V_IN 
Also note the correct power jumper settings
On: Thu, 29 Dec 2011 22:21:34 +0100 Bruzzlee wrote:

Hi all

After a long break I've continued the work on my quadrotor Lisa M project. Now I've done my wiring layout but I'm not sure if everything is correct. Especially the power source for the board: I2C1 CAN (V_BATT/GND) or SERVO1 (SV/GND)? The ADC1 bridge - I need it only for the first binding to the spectrum remote - right?


I want to publish this layout on wiki - please report mistakes!


thx Bruzzlee


reply via email to

[Prev in Thread] Current Thread [Next in Thread]