Will do. Thanks felix
On Nov 28, 2011 10:49 AM, "Felix Ruess" <
address@hidden> wrote:
Hi Joseph,
If you just can't flash, it might either be a problem with hardware,
cables or openocd... has nothing to do with gcc version, paparazzi
center, etc..
Sorry, but I don't have any idea what exactly the problem could be, I
would recommend to double check connections and ask openocd guys.
Cheers, Felix
On Mon, Nov 28, 2011 at 7:37 PM, Joseph Wagster <address@hidden> wrote:
> It appears I must have a different problem. Looks like I'm using ground
> station version 4.4.3. I do have power to the pieces plugged into my board
> but I don't get any led's (same physical problem different error). Still
> stuck.
>
> Debug below (lisa-l) linux mavrick
>
> Joey
>
> Run 'make -C /home/aerospace/paparazzi -f Makefile.ac AIRCRAFT=BOOZ2_A7
> ap.upload '
> make: Entering directory `/home/aerospace/paparazzi'
> BOOZ2_A7
> BUILD BOOZ2_A7, TARGET ap
> make[1]: Entering directory `/home/aerospace/paparazzi'
> make[1]: Leaving directory `/home/aerospace/paparazzi'
> make[1]: Entering directory `/home/aerospace/paparazzi'
> make[1]: Nothing to be done for `radio_ac_h'.
> make[1]: Leaving directory `/home/aerospace/paparazzi'
> make[1]: Entering directory `/home/aerospace/paparazzi'
> make[1]: Nothing to be done for `flight_plan_ac_h'.
> make[1]: Leaving directory `/home/aerospace/paparazzi'
> cd sw/airborne; make PAPARAZZI_SRC=/home/aerospace/paparazzi
> PAPARAZZI_HOME=/home/aerospace/paparazzi TARGET=ap all
> make[1]: Entering directory `/home/aerospace/paparazzi/sw/airborne'
> Using CC = /opt/paparazzi/stm32/bin/arm-none-eabi-gcc
> Using LD = /opt/paparazzi/stm32/bin/arm-none-eabi-gcc
> Using CP = /opt/paparazzi/stm32/bin/arm-none-eabi-objcopy
> Using DMP = /opt/paparazzi/stm32/bin/arm-none-eabi-objdump
> Using NM = /opt/paparazzi/stm32/bin/arm-none-eabi-nm
> Using SIZE = /opt/paparazzi/stm32/bin/arm-none-eabi-size
> Using OOCD = /opt/paparazzi/stm32/bin/openocd
> GCC version:
> arm-none-eabi-gcc (GCC) 4.4.3
> OOCD version:
> Open On-Chip Debugger 0.5.0-dev-00789-g59a6380 (2011-03-15-11:50)
> Licensed under GNU GPL v2
> For bug reports, read
> http://openocd.berlios.de/doc/doxygen/bugs.html
> *** NOT using multilib ***
>
> /home/aerospace/paparazzi/var/BOOZ2_A7/ap/ap.elf :
> section size addr
> .isr_vector 304 134217728
> .text 120260 134218032
> .ARM.extab 12 536870912
> .data 13244 536870924
> .bss 6828 536884168
> ._usrstack 2048 536890996
> .ARM.exidx 296 536893044
> .comment 2700 0
> .debug_aranges 8656 0
> .debug_pubnames 20554 0
> .debug_info 249583 0
> .debug_abbrev 44898 0
> .debug_line 70274 0
> .debug_frame 19104 0
> .debug_str 38496 0
> .debug_loc 93361 0
> .debug_ranges 21072 0
> .ARM.attributes 49 0
> Total 711739
>
>
>
>
> /home/aerospace/paparazzi/var/BOOZ2_A7/ap/ap.elf :
> section size addr
> .isr_vector 304 134217728
> .text 120260 134218032
> .ARM.extab 12 536870912
> .data 13244 536870924
> .bss 6828 536884168
> ._usrstack 2048 536890996
> .ARM.exidx 296 536893044
> .comment 2700 0
> .debug_aranges 8656 0
> .debug_pubnames 20554 0
> .debug_info 249583 0
> .debug_abbrev 44898 0
> .debug_line 70274 0
> .debug_frame 19104 0
> .debug_str 38496 0
> .debug_loc 93361 0
> .debug_ranges 21072 0
> .ARM.attributes 49 0
> Total 711739
>
>
>
> make[1]: Leaving directory `/home/aerospace/paparazzi/sw/airborne'
> cd sw/airborne; make PAPARAZZI_SRC=/home/aerospace/paparazzi
> PAPARAZZI_HOME=/home/aerospace/paparazzi TARGET=ap upload
> make[1]: Entering directory `/home/aerospace/paparazzi/sw/airborne'
> OOCD /home/aerospace/paparazzi/var/BOOZ2_A7/ap/ap.elf
> Open On-Chip Debugger 0.5.0-dev-00789-g59a6380 (2011-03-15-11:50)
> Licensed under GNU GPL v2
> For bug reports, read
> http://openocd.berlios.de/doc/doxygen/bugs.html
> Info : only one transport option; autoselect 'jtag'
> 1000 kHz
> adapter_nsrst_delay: 100
> jtag_ntrst_delay: 100
> cortex_m3 reset_config sysresetreq
> Info : max TCK change to: 30000 kHz
> Info : clock speed 1000 kHz
> Error: JTAG scan chain interrogation failed: all zeroes
> Error: Check JTAG interface, timings, target power, etc.
> Error: Trying to use configured scan chain anyway...
> Error: stm32.cpu: IR capture error; saw 0x00 not 0x01
> Warn : Bypassing JTAG setup events due to errors
> Warn : Invalid ACK 0 in JTAG-DP transaction
> Polling target failed, GDB will be halted. Polling again in 100ms
> Polling target failed, GDB will be halted. Polling again in 300ms
> Error: JTAG scan chain interrogation failed: all zeroes
> Error: Check JTAG interface, timings, target power, etc.
> Error: Trying to use configured scan chain anyway...
> Error: stm32.cpu: IR capture error; saw 0x00 not 0x01
> Warn : Bypassing JTAG setup events due to errors
> Warn : Invalid ACK 0 in JTAG-DP transaction
>
>
> in procedure 'reset'
> make[1]: *** [upload] Error 1
> make[1]: Leaving directory `/home/aerospace/paparazzi/sw/airborne'
> make: *** [ap.upload] Error 2
> make: Leaving directory `/home/aerospace/paparazzi'
>
> DONE (exec make -C /home/aerospace/paparazzi -f Makefile.ac
> AIRCRAFT=BOOZ2_A7 ap.upload 2>&1)
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel