Re: [Paparazzi-devel] Lisa/l compiler warning, cant flash

[Joseph Wagster]

It appears I must have a different problem.  Looks like I'm using ground station version 4.4.3.  I do have power to the pieces plugged into my board but I don't get any led's (same physical problem different error).  Still stuck.

Debug below (lisa-l) linux mavrick

Joey

Run 'make -C /home/aerospace/paparazzi -f Makefile.ac AIRCRAFT=BOOZ2_A7 ap.upload '
make: Entering directory `/home/aerospace/paparazzi'
BOOZ2_A7
BUILD BOOZ2_A7, TARGET ap
make[1]: Entering directory `/home/aerospace/paparazzi'
make[1]: Leaving directory `/home/aerospace/paparazzi'
make[1]: Entering directory `/home/aerospace/paparazzi'
make[1]: Nothing to be done for `radio_ac_h'.
make[1]: Leaving directory `/home/aerospace/paparazzi'
make[1]: Entering directory `/home/aerospace/paparazzi'
make[1]: Nothing to be done for `flight_plan_ac_h'.
make[1]: Leaving directory `/home/aerospace/paparazzi'
cd sw/airborne; make PAPARAZZI_SRC=/home/aerospace/paparazzi PAPARAZZI_HOME=/home/aerospace/paparazzi TARGET=ap all
make[1]: Entering directory `/home/aerospace/paparazzi/sw/airborne'
Using CC   = /opt/paparazzi/stm32/bin/arm-none-eabi-gcc
Using LD   = /opt/paparazzi/stm32/bin/arm-none-eabi-gcc
Using CP   = /opt/paparazzi/stm32/bin/arm-none-eabi-objcopy
Using DMP  = /opt/paparazzi/stm32/bin/arm-none-eabi-objdump
Using NM   = /opt/paparazzi/stm32/bin/arm-none-eabi-nm
Using SIZE = /opt/paparazzi/stm32/bin/arm-none-eabi-size
Using OOCD = /opt/paparazzi/stm32/bin/openocd
GCC version:
arm-none-eabi-gcc (GCC) 4.4.3
OOCD version:
Open On-Chip Debugger 0.5.0-dev-00789-g59a6380 (2011-03-15-11:50)
Licensed under GNU GPL v2
For bug reports, read
    http://openocd.berlios.de/doc/doxygen/bugs.html
*** NOT using multilib ***

/home/aerospace/paparazzi/var/BOOZ2_A7/ap/ap.elf  :
section             size        addr
.isr_vector          304   134217728
.text             120260   134218032
.ARM.extab            12   536870912
.data              13244   536870924
.bss                6828   536884168
._usrstack          2048   536890996
.ARM.exidx           296   536893044
.comment            2700           0
.debug_aranges      8656           0
.debug_pubnames    20554           0
.debug_info       249583           0
.debug_abbrev      44898           0
.debug_line        70274           0
.debug_frame       19104           0
.debug_str         38496           0
.debug_loc         93361           0
.debug_ranges      21072           0
.ARM.attributes       49           0
Total             711739




/home/aerospace/paparazzi/var/BOOZ2_A7/ap/ap.elf  :
section             size        addr
.isr_vector          304   134217728
.text             120260   134218032
.ARM.extab            12   536870912
.data              13244   536870924
.bss                6828   536884168
._usrstack          2048   536890996
.ARM.exidx           296   536893044
.comment            2700           0
.debug_aranges      8656           0
.debug_pubnames    20554           0
.debug_info       249583           0
.debug_abbrev      44898           0
.debug_line        70274           0
.debug_frame       19104           0
.debug_str         38496           0
.debug_loc         93361           0
.debug_ranges      21072           0
.ARM.attributes       49           0
Total             711739



make[1]: Leaving directory `/home/aerospace/paparazzi/sw/airborne'
cd sw/airborne; make PAPARAZZI_SRC=/home/aerospace/paparazzi PAPARAZZI_HOME=/home/aerospace/paparazzi TARGET=ap upload
make[1]: Entering directory `/home/aerospace/paparazzi/sw/airborne'
  OOCD    /home/aerospace/paparazzi/var/BOOZ2_A7/ap/ap.elf
Open On-Chip Debugger 0.5.0-dev-00789-g59a6380 (2011-03-15-11:50)
Licensed under GNU GPL v2
For bug reports, read
    http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
1000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
cortex_m3 reset_config sysresetreq
Info : max TCK change to: 30000 kHz
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: stm32.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Warn : Invalid ACK 0 in JTAG-DP transaction
Polling target failed, GDB will be halted. Polling again in 100ms
Polling target failed, GDB will be halted. Polling again in 300ms
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: stm32.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Warn : Invalid ACK 0 in JTAG-DP transaction


in procedure 'reset'
make[1]: *** [upload] Error 1
make[1]: Leaving directory `/home/aerospace/paparazzi/sw/airborne'
make: *** [ap.upload] Error 2
make: Leaving directory `/home/aerospace/paparazzi'

DONE (exec make -C /home/aerospace/paparazzi -f Makefile.ac AIRCRAFT=BOOZ2_A7 ap.upload  2>&1)