Yeah I know even at it to the last week. Thanks again for all the advice.
Joey
On Aug 24, 2011 9:16 PM, "Matheus Siqueira Barros" <
address@hidden> wrote:
> "It's always good to test all types, from the most insane even the most
> sensible!"
> ^^
> Good Luck!!
>
>
> 2011/8/25 Joseph Wagster <
address@hidden>
>
>> There were a few obstacles. But we have tested a piccolo autopilot systems
>> and the gps received in the same location. We left the ublox gps on for 15
>> minutes and got nothing. I think were gonna try doing it in a completely
>> open field next time though.
>>
>> Thank you very much for the idea
>> Joey
>> On Aug 24, 2011 8:57 PM, "Matheus Siqueira Barros" <
>>
address@hidden> wrote:
>> > Hey, In my project, the GPS wasn't working too. But the problem was in
>> place
>> > where I was! Do you've tested in a place open, I mean, a place without
>> > obstacles?
>> > Cheers!
>> >
>> > 2011/8/25 Joseph Wagster <
address@hidden>
>> >
>> >> There was voltage to both rd and tx. Perhaps its broken... thanks for
>> the
>> >> opinion tho I tried four platforms with ucenter and called unlock so i
>> >> thought it might be broken...
>> >>
>> >> Thank you very much,
>> >> Joey
>> >> On Aug 24, 2011 4:29 PM, "Chris Gough" <
address@hidden>
>> >> wrote:
>> >> > I've never seen that before, perhaps it is broken.
>> >> >
>> >> > It's a long shot, but the plug on those gs407's is not ideal, are you
>> >> > sure the connection is physically sound? maybe a fault on the RX line
>> >> > could cause the behavior you described.
>> >> >
>> >> > Chris Gough
>> >> >
>> >> >
>> >> > On Thu, Aug 25, 2011 at 4:15 AM, Joseph Wagster <
address@hidden
>> >
>> >> wrote:
>> >> >> I tried using windows xp today (still v6.20 couldn't get 6.02) It
>> still
>> >> >> didn't work. Auto baudrate seemed to be all over the place. It
>> randomly
>> >> had
>> >> >> connection at different baudeates. It wouldn't have my settings after
>> >> saving
>> >> >> and cycling power. I called unlock but their guy kept saying to make
>> >> sure we
>> >> >> saved the config. After I made it apparent I had done that he said to
>> >> make
>> >> >> sure success is shown under ack, but I never get success or failure.
>> >> >>
>> >> >> Thank you,
>> >> >> Joey
>> >> >>
>> >> >> On Aug 23, 2011 9:09 PM, "Joseph Wagster" <
address@hidden>
>> wrote:
>> >> >>> Im dual booting. It didn't work on maverick. It didn't seem to work
>> on
>> >> my
>> >> >>> windows 7 either. Maybe ill give a virtual xp as well.
>> >> >>>
>> >> >>> Thank you,
>> >> >>> Joey
>> >> >>> On Aug 23, 2011 7:10 PM, "Chris Gough" <
>>
address@hidden>
>> >> >>> wrote:
>> >> >>>> Hi Joey,
>> >> >>>>
>> >> >>>> Are you trying to use u-center via wine? I had no joy from that
>> >> >>>> (u-center ~v6.02 I think, debian squeeze), but XP on a VirtualBox
>> >> >>>> works fine for me.
>> >> >>>>
>> >> >>>> Chris Gough
>> >> >>>>
>> >> >>>> On Wed, Aug 24, 2011 at 10:08 AM, Joseph Wagster <
>> >>
address@hidden>
>> >> >>> wrote:
>> >> >>>>> Hello,
>> >> >>>>>
>> >> >>>>> Im working on maverick with the Lisa/l and can't seem to get gps
>> >> >>>>> working.
>> >> >>> I
>> >> >>>>> tried u- center but got no signal. It seemed similar to
>> configuring
>> >> the
>> >> >>>>> modems but I cant tell whats wrong. I followed the steps on the
>> wiki
>> >> and
>> >> >>>>> used a ftdi for tx and rx to usb. I used the autopilot as a power
>> >> source
>> >> >>> and
>> >> >>>>> the gs407 helical gps antenna from sparkfun. Also the manual
>> didn't
>> >> help
>> >> >>> for
>> >> >>>>> ucenter. I checked continuity and don't know what's wrong. The
>> >> baudrate
>> >> >>> is
>> >> >>>>> the same as the airframe file.
>> >> >>>>>
>> >> >>>>> Thank you,
>> >> >>>>> Joey
>> >> >>>>>
>> >> >>>>> _______________________________________________
>> >> >>>>> Paparazzi-devel mailing list
>> >> >>>>>
address@hidden
>> >> >>>>>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel>> >> >>>>>
>> >> >>>>>
>> >> >>>>
>> >> >>>>
>> >> >>>>
>> >> >>>> --
>> >> >>>> .
>> >> >>>>
>> >> >>>> _______________________________________________
>> >> >>>> Paparazzi-devel mailing list
>> >> >>>>
address@hidden
>> >> >>>>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel>> >> >>
>> >> >> _______________________________________________
>> >> >> Paparazzi-devel mailing list
>> >> >>
address@hidden>> >> >>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > .
>> >> >
>> >> > _______________________________________________
>> >> > Paparazzi-devel mailing list
>> >> >
address@hidden
>> >> >
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel>> >>
>> >> _______________________________________________
>> >> Paparazzi-devel mailing list
>> >>
address@hidden>> >>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >>
>> >>
>> >
>> >
>> > --
>> > *Best Regards*
>> >
>> +----------------------------------------------------------------------------+
>> > Matheus Siqueira Barros
>> > Federal University of Itajubá (UNIFEI)
>> > * *Mobile: +55 (35) 9828-0650
>> >
>> +----------------------------------------------------------------------------+
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>>
address@hidden>>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>>
>
>
> --
> *Best Regards*
> +----------------------------------------------------------------------------+
> Matheus Siqueira Barros
> Federal University of Itajubá (UNIFEI)
> * *Mobile: +55 (35) 9828-0650
> +----------------------------------------------------------------------------+