Re: Re: [Paparazzi-devel] Re: trouble getting started...

[James Spezeski]

I just checked and there was 5V on the VBUS pin.  I also checked all the electrical connections from the pins on the USB connector (the one that plugs into my computer) to the solder joints on the TWOG, and they were all good.

Should I try flashing the bootloader?

James

On Wed, Jan 19, 2011 at 4:25 AM, Martin Mueller <address@hidden> wrote:

Hi Thomas,

> Maybe at least my second comment on the power consumption can help.

my statement regarding the "self power" was wrong - hope that does not confuse. The Vbus pin only switches the bootloader on, any LPC2148 board does not consume a noteable current through USB. They actually are self powered, not bus powered.

Martin



_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel