[Paparazzi-devel] Reply to "PPM encoder : channels not responding when m
From:
Kurtis Kraemer
Subject:
[Paparazzi-devel] Reply to "PPM encoder : channels not responding when moving stick, quickly on R/C (Philippe Volivert)"
Date:
Tue, 9 Nov 2010 19:30:12 -0500
I was having similar problems with slow servo response using Spektrum equipment and the PPM encoder. I was powering everything (Rx, Encoder, and servos) all form the autopilot (Tiny 2.11).
I then redid the wiring as shown in the diagram in the link below, with the servos and Rx powered independently.
After that it worked much better. There is still a slight delay (half second or less), but I was able to fly my Easystar just fine. Hopefully this works for you.
Kurtis Ottawa, Canada
[Prev in Thread]
Current Thread
[Next in Thread]
[Paparazzi-devel] Reply to "PPM encoder : channels not responding when moving stick, quickly on R/C (Philippe Volivert)",
Kurtis Kraemer<=