Re: [Paparazzi-devel] TWOG/TINY v2 IMU

[Vassilis V.]

It should not be too difficult to use a CHR-6d IMU with a Tiny. I  
already implemented the DCM algorithm on it and it is fairly good for  
a quad-rotor (with proper vibration mitigation), so it should work for  
a fixed wing. The new version will have an SPI port and a mag so it  
should be trivial to replace the roll and pitch angles with the ones  
from the IMU. It is on my project list to try out as soon as flying  
season starts again. For more information on what I have done with it  
for my quad see:

http://vrhome.net/vassilis

Vassilis

On Jan 20, 2010, at 3:15 AM, Jesus Martin Sanchez wrote:

> Hello:
>    Any body have tried an imu with that autopilots? I´m looking for  
> a thermopile replacement... but the diydrones it´s going to  
> avaliable maybe in summer... the chimu one with the analog converter  
> only use x and y inputs, no the z, and I don´t know if it´s  
> possible. what happen if I don´t connect anything in the z input  
> sensor?
>    Thanks
>    Jesús
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel