paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Booz EEPROM


From: antoine drouin
Subject: Re: [Paparazzi-devel] Booz EEPROM
Date: Sun, 6 Dec 2009 02:34:20 +0100

the eeprom on the IMU is intended to store calibration parameters, the
eeprom on the mainboard is useless

On Sun, Dec 6, 2009 at 2:12 AM, Jayson MacKiddie
<address@hidden> wrote:
> Hello, I am new to Paparazzi. We have begun to develope a dual MCU version
> of Booz. a sort of Booz meets Classix offspring if you will. Regarding
> hardware, could anyone clear up exactly what the two EEPROMS are used for in
> the Booz design? There is one on the main board and another on the IMU
> board. What is the full extent of their use and why two EEPROMS and on
> different boards? We've read a few things here and there but nothing more,
> and would like to be certain we havn't missed anything. We'd like to avoid
> running through the entire code to clear up such a simply matter.
>
> Great work everyone!
>
> Regards,
> Jay
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]