paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] Hardware In The Loop


From: 郭 flying pig
Subject: RE: [Paparazzi-devel] Hardware In The Loop
Date: Wed, 29 Apr 2009 08:49:32 +0000

Hi there
 
  I have just edit your file, and using FTDI cable, which works in the hardware in the loop simulation, here is the file for you
 
 
  I hope it works for you as well.
 
 
 
Regards
                                                                                                                       Chen
 

Date: Wed, 29 Apr 2009 08:23:17 +0000
Subject: Re: [Paparazzi-devel] Hardware In The Loop
From: address@hidden
To: address@hidden

Ok. But send me also your files. Late this aftermoon I will send you my files and I will be on IRC.
 
Regards
Rui Costa

2009/4/29 郭 flying pig <address@hidden>
Hi there
 
  I use the XBee modem, I can try with the FTDI cable latter, also with your file. wait for me until late this afternoon (time in Europe)
 
 
 
Regards
 
                                                                                                                                        Chen
 

Date: Wed, 29 Apr 2009 08:10:22 +0000
Subject: Re: [Paparazzi-devel] Hardware In The Loop

From: address@hidden
To: address@hidden

Hi again,
 
You tried the HITL with USB cable, datalink or FTDI cable?
 
Can you send me your Tiny 2.11 aircraft.xml, conf.xml and control_panel.xml files?
 
Thank you.
 
Regards
Rui Costa

2009/4/28 郭 flying pig <address@hidden>
Hi there
 
  I have try the hard ware in the loop, it works (and I believe I chat with you on the IRC on Sunday).
 
 
  I also found that, you must select the HIL in the A/C (in the paparazzi center), then change the aircraft file to your own one (ie from the example to your aircraft file), then upload it with ap. start the section of HIL, it should works.  I work on my Tiny1.1 and Tiny 2.11.
 
  If you still can't get it work, let me know, I can try with your file.
 
 
Regards
 
                                                                                                                 Chen

 

Date: Sun, 26 Apr 2009 19:27:46 +0000
From: address@hidden Subject: [Paparazzi-devel] Hardware In The Loop


Hi all,


I'm trying Hardware In The Loop without success. I made what is described on wiki, but when I simulate I get no GPS and IR sensors data from simulation.
I'm using the FTDI cable. It's needed to modify the USB port baud rate to 57600? How can I do that in Ubuntu?



Best regards
Rui Costa
www.azoreanuav.com


隨身的 Windows Live Messenger 和 Hotmail,不限時地掌握資訊盡在指間— Windows Live for Mobile

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel




--
Rui Costa
www.azoreanuav.com


隨身的 Windows Live Messenger 和 Hotmail,不限時地掌握資訊盡在指間— Windows Live for Mobile

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel




--
Rui Costa
www.azoreanuav.com


下載 Windows Live Messenger 9.0,多元溝通、盡情分享,和即時通訊好友線上同樂!— 立即下載

Attachment: azorean_hitl_usb.xml
Description: Text Data

Attachment: conf.xml
Description: Text Data

Attachment: control_panel.xml
Description: Text Data


reply via email to

[Prev in Thread] Current Thread [Next in Thread]