RE: [Paparazzi-devel] flight plan's block change through GCS buttons problem SOLVED

[akochevar]

All,
As someone said in IRC as well, Chris could have also changed the XBEE to be PPRZ and it would have worked.  Just so miscommunication between the modems when this happens.  I believe what happens is the GCS sends the message assuming API mode with a header, but the vehicle cant receive it because it isnt expecting the header.  I could be way wrong though

AJ

-------- Original Message --------
Subject: [Paparazzi-devel] flight plan's block change through GCS
buttons problem SOLVED
From: chris <address@hidden>
Date: Fri, April 10, 2009 2:27 pm
To: address@hidden

Hi.
I talked with a friend on the IRC and he found what was wrong.
There were 3 lines on the airframe file that shouldn't be there.
<section name="DATALINK" prefix="DATALINK_">
<define name="DEVICE_TYPE" value="XBEE"/>
<define name="DEVICE_ADDRESS" value="...."/>
</section>
I commented those lines and the GCS started to talk to the modems.
With those lines i could receive but not transmit from the GCS, weird...
Chris



_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel