[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] please help with gps
From: |
Ben Paratz |
Subject: |
Re: [Paparazzi-devel] please help with gps |
Date: |
Fri, 19 Dec 2008 19:03:18 +1000 |
Hi,
You may be having a similar problem to one that I had recently.
Are you using a Tiny v2.11 with LEA-5H? If so, you need to add the following line in the makefile section of the airframe code:
-DGPS_USE_LATLONG
This must be above the line: ap.srcs += gps_ubx.c gps.c
From my understanding, all this does is tells something in the autopilot to actually use the data coming from the GPS. Before I added this line in my airframe code, the GCS would fully populate, but the autopilot was not properly processing the data from the GPS and so the resulting coordinates seemed to be random.
Would you be able to let me know how you go with solving this problem? I would be interested in what the cause of the problem is.
Hope this helps,
Ben Paratz
On Fri, Dec 19, 2008 at 6:22 AM, sandeep hari
<address@hidden> wrote:
need help in two things
1) my gps module is showin coordinates correctly with u centre software. i use ppzuav board. bt when flashed into board the gps is junk coordinates like 0 and 172.
2) unable to load google tiles
_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel