paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Servo declarations?


From: C Kuo
Subject: Re: [Paparazzi-devel] Servo declarations?
Date: Mon, 9 Jun 2008 10:22:45 +0100
User-agent: Internet Messaging Program (IMP) 3.2.2

Hi there

  I had a bit of problem for this as well, do you just change the line in the
airframes xml file?
  Because when I compile it, it come out some error for 4017.


 Do I need the h file form the CVS inorder to complile for 4017?


Regards

                                                             Chen


Quoting Michel GORRAZ <address@hidden>:

> "4015" or "4017" is the name of the PPM decoder chip on your autopilot
> board.
> They do the same job (interface between the microcontroller and the
> servos)but the 4015 is a shift register and the 4017 is a counter.
> The command signals are different, so the software "driver" need to be
> different.
> 
> If your board is a Tiny v1, use servos_4015_hw.h.
> If it's a Tiny v2, use servos_4017_hw.h
> If it's a Classix, the PPM decoder chip is on your RC receiver....
> 
> @+
> Michel
> 
> 
> 2008/6/9 Daniel Morgan <address@hidden>:
> 
> > What is the difference between using the servos_4015_hw.h the
> > servos_4017_hw.h files when declaring the servos?
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
> 






reply via email to

[Prev in Thread] Current Thread [Next in Thread]