.dtors 0 17044
.data 0 1073741824
.bss 0 1073741824
.stack 4096 1073741824
.comment 18 0
Total 4774
cd sw/airborne; make PAPARAZZI_SRC=/home/mcolman/paparazzi3 PAPARAZZI_HOME=/home/mcolman/paparazzi3 TARGET=tunnel upload
lpc21isp /home/mcolman/paparazzi3/var/MJ5/tunnel/tunnel.hex /dev/ttyS0 38400 12000
lpc21isp version 1.27
File /home/mcolman/paparazzi3/var/MJ5/tunnel/tunnel.hex:
loaded...
converted to binary format...
image size : 17044
Synchronizing.................................................................................................... no answer on '?'
make[1]: *** [upload] Error 4
make: *** [tunnel.upload] Error 2
Here's a working example:
(connect computer to usb port on the Tiny)
address@hidden:~/paparazzi3$ make AIRCRAFT=MJ5 tunnel.upload FLASH_MODE=IAP
[text about compiling]
make[1]: Nothing to be done for `all_ac_h'.
cd sw/airborne; make PAPARAZZI_SRC=/home/mcolman/paparazzi3 PAPARAZZI_HOME=/home
/mcolman/paparazzi3 TARGET=tunnel all
/home/mcolman/paparazzi3/var/MJ5/tunnel/tunnel.elf :
section size addr
.text 660 16384
.ctors 0 17044
.dtors 0 17044
.data 0 1073741824
.bss 0 1073741824
.stack 4096 1073741824
.comment 18 0
Total 4774
/home/mcolman/paparazzi3/var/MJ5/tunnel/tunnel.elf :
section size addr
.text 660 16384
.ctors 0 17044
.dtors 0 17044
.data 0 1073741824
.bss 0 1073741824
.stack 4096 1073741824
.comment 18 0
Total 4774
cd sw/airborne; make PAPARAZZI_SRC=/home/mcolman/paparazzi3 PAPARAZZI_HOME=/home
/mcolman/paparazzi3 TARGET=tunnel upload
/home/mcolman/paparazzi3/sw/ground_segment/lpc21iap/lpc21iap /home/mcolman/papa
razzi3/var/MJ5/tunnel/tunnel.elf
.
Found USB device
BootROM code: 2.12
Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
BootLoader version: 1.3
#
Starting software at 0x00004000
2008/3/28 <
address@hidden>:
Hi Miles,
> I just finished assembling a Tiny v2.11 and I think I haven't
successfully loaded
> the bootloader. Terminal output with 'ioctl get failed' is below. Am I
sucessfully
> loading the bootloader to the Tiny?
Looks good, LPC is running and communicating with the PC (regarding the
message title, you are loading bl.hex rather than bl_ram.hex).
> The reason I think the upload doesn't work is the 'ioctl get failed'
message, and,
> uploading the serial tunnel to the Tiny from the ground station fails.
You can ignore the "ioctl get failed" after download is "finished". Are
all the four USB lines Vbus, GND, D+ and D- connected? Do you see the
device using "lsusb"?
Martin
_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel