paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] Tiny1


From: Yves Touchette
Subject: RE: [Paparazzi-devel] Tiny1
Date: Sun, 16 Mar 2008 11:34:19 -0400

Hi,

It's not clear to me which PCB you have. Is it a tiny13 1.1 or tiny13 0.99 or a tiny2.11?

The wiki has bill of materials that lists all the components need to build a tiny13 1.1:
http://paparazzi.enac.fr/wiki/index.php/Tiny#Bill_of_Materials_.28BOM.29

And for the tiny 2.11:
http://paparazzi.enac.fr/wiki/index.php/Tiny_v2#Bill_Of_Material

In any case, if you have the eagle file of your PCB, then you can generate a BOM from eagle by following these setps:

With the schematic open, go file->run, Choose bom.ulp. This will give you a list of all components with there values.

-yvest

> Date: Sat, 15 Mar 2008 14:29:01 +0400
> From: address@hidden
> To: address@hidden
> Subject: [Paparazzi-devel] Tiny1
>
> Dear all,
>
> I have the Tiny1 PCB ready but I am facing difficulties in assembling the components since the EAGLE files are not readable due to font sizes and overlapping. Please if any one has a clear picture of the board with components specified on it let me know.
>
> And I should apologize for lots of newbie questions that I ask.
>
> Warm regards,
>
> Mohammad
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel


Snap and Share.  From your phone to your space.  Post your pics here.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]