[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Unable to use GCS with Tiny 1.1
From: |
Mohit Mundhra |
Subject: |
Re: [Paparazzi-devel] Unable to use GCS with Tiny 1.1 |
Date: |
Mon, 25 Feb 2008 21:58:55 +0530 |
I am not using any modem at the moment. I am just using a FTDI serial
cable at the moment, the airframe being used is MicroJetI.xml in which
we have commented the xbee modem and uncommented the pprz transport.
In the control center we are running Flight address@hidden session.
-
Mohit
On Mon, Feb 25, 2008 at 9:39 PM, Pascal Brisset <address@hidden> wrote:
> Hi Mohit,
>
> which modem, which airframe configuration are you using ? Which session
> are you running ?
>
> --Pascal
>
>
>
> Mohit Mundhra wrote:
> > Hello,
> >
> > I am using Tiny v1.1 along with Paparazzi3. I have successfully
> > uploaded the bootloader and also the flight program which is then
> > confirmed by the blinking LED on the paparazzi board. But when I try
> > to start the GCS from the control center, it only shows me the bare
> > empty GCS window and is not loading anything. Can anyone please help
> > me with the configurations.
> >
> > thanks
> >
> >
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
--
Mohit Mundhra
Phone: +91 93 1967 2480
--~--~---------~--~----~------------~-------~--~----~
Aurora Integrated Systems
-~----------~----~----~----~------~----~------~--~---