[Paparazzi-devel] Error in Gerber .cmp file for Adxrs300_breakout board

[Stephen L Hulme]

Dear Paparazzi Project Experts

 

When I attempt to export a gerber file set for adxrs300_breakout.brd from the paparazzi3/hw/in_progress folder

to a fabricating company named BatchPCB  I receive their error message as set out below.

 

Is this something that can be changed easily or should I give up and spend silly money elsewhere?

 

As far as I can ascertain the recorded error is associated with the gerber adxrs300_breakout.cmp file.  

 

And yes I have tried submitting gerber files for gyro_adxr.brd in the hw/sensors folder

and a drill size error is reported. This company only supports drill sizes down to 20 mil

and this particular board requests a 14 mil drill size. 

 

Regards

 

Stephen L Hulme

 

Error Message:

 

 

Zip File Format Selector (Step 2 of 3)

X Max: 0.8557 X Min: 0.0907

Y Max: 0.7087 Y Min: 0.0907

PCB Size: 0.47277 inches square
Estimated price per board: $2.5 [$2.5/sq.in]

There were errors in the Top Layer File. Please address them and resubmit the zip file. Details bellow:

Checked Aperture 10 (0.0020): Failed
        Error - Aperture too thin
Checked Aperture 11 (0.0197): Passed
Checked Aperture 12 (0.0425x0.0413): Passed
Checked Aperture 13 (0.0413x0.0425): Passed
Checked Aperture 14 (0.0433x0.0394): Passed
Checked Aperture 15 (0.0394x0.0433): Passed
Checked Aperture 16 (0.0600x0.1200): Passed
Checked Aperture 17 (0.0120): Passed
Checked Aperture 18 (0.0400): Passed
Checked Aperture 19 (0.0100): Passed

Please consult the FAQ (link on the left) for further assistance.