RE: [Paparazzi-devel] GPS patch tiny

[Yves Touchette]

Martin,

How hard are they to solder by hand? I'm thinking that we might want to 
manifacture the tiny without the GPS and let the end user provide there own 
GPS. This would allow us to manifacture the boards with a much smaller 
investement something like 10K$ less...

So after the boards are manifactured we could test several different antenna 
and recommand the best one...

What do you think?

-yvest

> Hi,
>
> some info for those of you who are working on the tiny PCB. The 13x13
> ceramic GPS patch is from Sangshin, Korea. The tiny boards we have been
> flying so far had a heavier 20x20 patch (we only had a small batch of
> them). It might be a good idea to test your board with the 13x13 before
> going to mass production as the whole board is part of the antenna and
> thickness and material can affect the result.
>
> Martin
>
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel