Code has been updated by Bernard Davison, Stephen Dwyer, MavLab <address@hidden>, Piotr Esden-Tempski, Dirk Dokter <address@hidden>, Christophe De Wagter, Felix Ruess, Gautier Hattenberger <address@hidden>, Xavier Gibert <address@hidden>. All 4 jobs passed with 284 tests in total.
|
Felix Ruess Merge pull request #289 from paparazzi/stm_uart1_hw_flow_control Add UART hardware flow control (for STM32 only) |
816884c43cff286272b829f78b8fb2ee48cfbc0e |
|
Felix Ruess [arch] add hw_flow_control flag to uart_periph_set_baudrate for lpc21 and omap (unused there though) |
91ef1c9e17ce0d7760c24522a3b6dc2a3a3fba18 |
|
Felix Ruess [build] radio_control_ppm, default to PA_01 (SERVO6 on Lisa/M) To configure the pin from the airframe file, set the RADIO_CONTROL_PPM_PIN to one of these values: * PA_01 or SERVO6, (this is the default) * PA_10 or UART1_RX e.g. to configure it on the uart1 rx pin for lisa/m: <configure name="RADIO_CONTROL_PPM_PIN" value="UART1_RX"/> |
e880b2c1bbf9410d3db42ea5a38504e1100218db |
97 more changes… |
8 Fixed Tests
|