openvortex-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Openvortex-dev] Re: [Alsa-devel] Re: au88x0 modem


From: Sasha Khapyorsky
Subject: Re: [Openvortex-dev] Re: [Alsa-devel] Re: au88x0 modem
Date: Thu, 15 Sep 2005 00:03:03 +0300
User-agent: Mutt/1.5.10i

On 11:47 Wed 14 Sep     , Maarten Vanraes wrote:
> >
> > 0000:00:06.0 Multimedia audio controller: Aureal Semiconductor AU8810
> > Vortex Digital Audio Processor (rev 03)
> >     Subsystem: ASUSTeK Computer Inc.: Unknown device 1043
> >     Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR- FastB2B-
> >     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> > <TAbort-
> > <MAbort- >SERR- <PERR-
> >     Interrupt: pin A routed to IRQ 10
> >     Region 0: Memory at fedc0000 (32-bit, non-prefetchable) [size=256K]
> >     Region 1: I/O ports at fce0 [size=8]
> >     Region 2: I/O ports at fce8 [size=8]
> >     Capabilities: [dc] Power Management version 2
> >             Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
> > PME(D0-,D1-,D2+,D3hot+,D3cold+)
> >             Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >
> 
> if it helps: mine is:
> 
> 00:0c.0 Multimedia audio controller: Aureal Semiconductor AU8810 Vortex
> Digital Audio Processor (rev 02)
>         Subsystem: Aureal Semiconductor AU8810 Vortex Digital Audio Processor
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64 (500ns min, 20750ns max), cache line size 40
>         Interrupt: pin A routed to IRQ 169
>         Region 0: Memory at 00000000fdc00000 (32-bit, non-prefetchable)
> [size=256K]
>         Region 1: I/O ports at dc00 [size=8]
>         Region 2: I/O ports at cc00 [size=8]
>         Capabilities: [dc] Power Management version 2
>                 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2+,D3hot+,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
>

Thank you guys.

Could you send us full lspci output - there is approach that modem uses
separate from audio PCI entry. In such way it is done with most AC97
audio/modem controllers and possibly with some au8810 too.

Sasha.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]