[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Openvortex-dev] building problems
From: |
Will DeRousse |
Subject: |
Re: [Openvortex-dev] building problems |
Date: |
Tue, 6 May 2003 16:46:01 -0500 |
Try this instead:
1.) redownload cvs tree
2.) run ./configure --with-cards=au8830
3.) make
Will
On Tue, 6 May 2003 16:05:11 -0400
Jonathan Halcrow <address@hidden> wrote:
> How is everyone building this? Running cvscompile, it seems to get stuck in
> a
> loop and go until it runs out of memory. I'm running mandrake 9.1 with the
> stock kernel (2.4.21) on an Athlon 600 w/ 192mb ram. I've tried playing
> around with cvscompile, removing the configure arg --with-isapnp=yes and
> adding with-cards=au8830 to no avail. I forgot to save the exact output last
> time I did it, but I will reply with it later if it is needed. The gist of
> it is something like "xmalloc failed to allocate xxxxx bytes (0 bytes)".
> Should I not be using cvscompile or should I compiling against a 2.5.x kernel
> or something like that?
>
> Thanks
> Jonathan Halcrow
>
>
> _______________________________________________
> Openvortex-dev mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/openvortex-dev
>