[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[openap-cvs] : openap-main .config,NONE,1.1 Rules.mk,NONE,1.1 Makefile,1
From: |
David Kimdon <address@hidden> |
Subject: |
[openap-cvs] : openap-main .config,NONE,1.1 Rules.mk,NONE,1.1 Makefile,1.20,1.21 README,1.6,1.7 |
Date: |
Thu, 08 Aug 2002 16:48:02 -0400 |
Update of /cvsroot/openap/openap-main
In directory subversions:/tmp/cvs-serv21198
Modified Files:
Makefile README
Added Files:
.config Rules.mk
Log Message:
cleanup, consolidation, cruft removal.
--- NEW FILE ---
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_DEV_ROOT="31 0"
CONFIG_PRISM2=y
CONFIG_PCMCIA_CS=y
CONFIG_ALIOS=y
CONFIG_TARGET="i386-uclibc"
CONFIG_SITE="config/cross-config.i386"
CONFIG_PREFIX="/opt/openap-0.1.3"
CONFIG_AP_BRIDGE=y
# CONFIG_AP_ROUTER is not set
# CONFIG_UDHCPC is not set
CONFIG_WIRELESS_TOOLS=y
CONFIG_ALIOS=y
CONFIG_BRIDGE_UTILS=y
CONFIG_PCMCIA_CS=y
CONFIG_BUSYBOX=y
CONFIG_ERASE=y
# CONFIG_IPTABLES is not set
CONFIG_PRISM2=y
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set
#
# Processor type and features
#
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_X86_USE_STRING_486=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_AMD_ELAN=y
CONFIG_WL11000=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
#
# General setup
#
CONFIG_NET=y
# CONFIG_PCI is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ACPI is not set
# CONFIG_APM is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CHAR=y
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_AMDSTD is not set
# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_JEDEC is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=1000000
CONFIG_MTD_PHYSMAP_LEN=100000
CONFIG_MTD_PHYSMAP_BUSWIDTH=1
CONFIG_MTD_PHYSMAP_TYPE="jedec_probe"
# CONFIG_MTD_PHYSMAP_2DEVICES is not set
# CONFIG_MTD_PNC2000 is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_ELAN_104NC is not set
# CONFIG_MTD_MIXMEM is not set
# CONFIG_MTD_OCTAGON is not set
# CONFIG_MTD_VMAX is not set
# CONFIG_MTD_L440GX is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
# CONFIG_UNIX is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
CONFIG_BRIDGE=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=y
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
# CONFIG_STRIP is not set
# CONFIG_WAVELAN is not set
# CONFIG_ARLAN is not set
# CONFIG_AIRONET4500 is not set
# CONFIG_AIRONET4500_NONCS is not set
# CONFIG_AIRONET4500_PROC is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
CONFIG_NET_WIRELESS=y
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=4
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_EXT2_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
CONFIG_ZLIB_FS_INFLATE=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_RIO500 is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
--- NEW FILE ---
ifeq ($(TOPDIR)/.config,$(wildcard $(TOPDIR)/.config))
include $(TOPDIR)/.config
endif
uclibc: $(STAMPDIR)/.uclibc
$(STAMPDIR)/.uclibc :
mkdir -p $(CONFIG_PREFIX) || \
(echo "failed to create $(CONFIG_PREFIX)"; exit 1)
mkdir -p build/
-cd build/gcc-2.95 && $(MAKE) clean
cd build && tar -xzf ../misc/gcc-2.95-uclibc-20020711-1.src.tar.gz
patch -p0 < misc/uclibc-build.diff
# For the tool build we don't want these variables defined
# since we need to use the native host toolchain.
export -n CC LD AS AR STRIP CONFIG_SITE; \
cd build/gcc-2.95 && make \
TARGET_PATH=$(TARGET_PATH) \
ARCH=$(ARCH)
@echo
@echo "Put $(TARGET_PATH)/bin/ at the end of your PATH."
@echo
touch $(STAMPDIR)/.uclibc
tools: $(STAMPDIR)/.tools
$(STAMPDIR)/.tools :
$(MAKE) CC=gcc -C $(KERNEL_DIR)/scripts/cramfs/
touch $(STAMPDIR)/.tools
LIBS=libpcap libnet
libs:
for dir in $(LIBS) ; do \
if ! ( cd $$dir && $(MAKE) -f ./i802/rules install) ; then \
exit 1 ; \
fi \
done
Index: Makefile
===================================================================
RCS file: /cvsroot/openap/openap-main/Makefile,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -r1.20 -r1.21
--- Makefile 8 Aug 2002 20:30:15 -0000 1.20
+++ Makefile 8 Aug 2002 20:47:58 -0000 1.21
@@ -17,28 +17,20 @@
# No need to change anything below this line unless you are
# hacking on the build system.
-include make/config.mk
-
-all: do-it-all
-
-ifeq (.config,$(wildcard .config))
-include .config
-do-it-all: image
-else
-do-it-all: menuconfig
-endif
+all: image
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
-OPENAP_VERSION = 0.1.3
+OPENAP_VERSION = pre0.1.3
TOPDIR := $(shell pwd)
STAMPDIR = $(TOPDIR)
IMAGE_DIR = $(TOPDIR)/Image_final
DESTDIR = $(IMAGE_DIR)
TARGET_CONFIG = $(TOPDIR)/config/$(TARGET)/config.in
+include $(TOPDIR)/Rules.mk
# If we are doing a build to be run on the native system we don't
# set these variables. We will instead use whatever tools the
@@ -54,8 +46,8 @@
ARCH = $(shell echo $(CONFIG_TARGET) | sed -e 's/-.*//')
CROSS_COMPILE = $(CONFIG_TARGET)-
MKLIBSFLAGS = --no-default-lib -L $(CONFIG_PREFIX)/$(CONFIG_TARGET)/lib \
- --target=$(CONFIG_TARGET)
-PCMCIA_DIR = $(TOPDIR)/pcmcia-cs
+ --target=$(CONFIG_TARGET)
+PCMCIA_DIR = $(TOPDIR)/pcmcia-cs
else
# FIXME: KERNEL_DIR,PCMCIA_DIR are configurable parameters they
# need to move to a better place
@@ -63,8 +55,6 @@
KERNEL_DIR = /usr/src/linux
endif
-MKLIBSFLAGS +=-d $(IMAGE_DIR)/lib
-
CC = $(CROSS_COMPILE)gcc
TARGET_CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)ld
@@ -73,16 +63,19 @@
OBJCOPY = $(CROSS_COMPILE)objcopy
INSTALL = /usr/bin/install
STRIPFLAGS = "--remove-section=.comment --remove-section=.note"
+MKLIBSFLAGS += -d $(IMAGE_DIR)/lib
CFLAGS = -Wall -Wstrict-prototypes
HOSTCC = gcc
BUILD_CC = $(HOSTCC)
-BUILD_HOST = $(shell $(TOPDIR)/config/config.guess)
+BUILD_HOST = $(shell $(TOPDIR)/config/config.guess)
-
-export HOSTCC OPENAP_VERSION TOPDIR CONFIG_SITE PATH TOOL_PREFIX TARGET_PATH \
- CONFIG_TARGET ARCH TARGET CC LD AR STRIP BUILD_HOST BUILD_CC \
- TARGET_CC STRIPFLAGS KERNEL_DIR MAKEFLAGS OBJCOPY CROSS_COMPILE \
- DESTDIR TOOLDIR INSTALL MKNOD
+export CC LD AS AR STRIP OBJCOPY INSTALL CONFIG_SITE DESTDIR TOOLDIR \
+ BUILD_CC
+
+# I'm planning on getting rid of the following variables, probably, maybe
+export HOSTCC OPENAP_VERSION TOPDIR CONFIG_SITE TOOL_PREFIX TARGET_PATH \
+ CONFIG_TARGET ARCH TARGET BUILD_HOST BUILD_CC \
+ TARGET_CC STRIPFLAGS KERNEL_DIR MAKEFLAGS CROSS_COMPILE
bootstrap: tools configure config_pcmcia kernel
@@ -96,12 +89,8 @@
touch $(STAMPDIR)/.configure
endif
-# Convienience target, create a cross-compiling shell. The logic above sets
-# some environmental variables that tell make, configure etc. to do the right
-# thing for the target we are working with. This will give you a shell with
-# those variables set and you will end up with a system working as you expect
-# it to (building for your target)
-
+# Convienience target, create a cross shell, tool will act as normal, but
+# you will be building for the target.
xshell:
env
$(CONFIG_SHELL)
@@ -130,16 +119,6 @@
cd $(PCMCIA_DIR) ; \
$(PCMCIA_DIR)/Configure $(PCMCIA_OPTS)
-check:
- if [ ! -u $(MKNOD) ] ; then \
- echo "Only root can make special device files. To allow a
normal user"; \
- echo "to create special device files please do, as root:" ; \
- echo "chmod +s $(MKNOD)" ; \
- echo ; \
- echo ; \
- /bin/false ; \
- fi
-
kernel:
$(MAKE) -C linux bzImage ROOT_DEV=$(CONFIG_ROOT_DEV) HOSTCC=$(HOSTCC)
@@ -165,17 +144,13 @@
scripts/mklibs $(MKLIBSFLAGS) \
`find $(IMAGE_DIR) -type f -perm +0111`
-checkconfig:
- @[ -f $(TARGET_CONFIG) ] || \
- (echo "$(TARGET_CONFIG) does not exist!"; exit 1)
-
-menuconfig: checkconfig
+menuconfig:
$(MAKE) -C scripts/lxdialog all
$(CONFIG_SHELL) scripts/Menuconfig $(TARGET_CONFIG)
cp .config linux/
cp config/autoconf.h linux/include/linux
-oldconfig: $(TOPDIR)/.config checkconfig
+oldconfig: $(TOPDIR)/.config
$(CONFIG_SHELL) scripts/Configure -d $(TARGET_CONFIG)
cp .config linux/
cp config/autoconf.h linux/include/linux
@@ -224,7 +199,6 @@
done
$(RM) flash flash.md5 $(STAMPDIR)/.configure
-include make/rules.mk
-include $(addsuffix /facility/rules.mk,$(subdir-y))
Index: README
===================================================================
RCS file: /cvsroot/openap/openap-main/README,v
retrieving revision 1.6
retrieving revision 1.7
diff -u -r1.6 -r1.7
--- README 8 Aug 2002 17:26:24 -0000 1.6
+++ README 8 Aug 2002 20:47:58 -0000 1.7
@@ -5,10 +5,9 @@
To build from fresh sources do:
-# make menuconfig
-# make uclibc
+# make tools
-(now add soemthing like /opt/openap-0.1.3/i386-uclibc/bin/ to the _end_ of your
+(now add something like /opt/openap-0.1.3/i386-uclibc/bin/ to the _end_ of your
PATH)
# make bootstrap
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [openap-cvs] : openap-main .config,NONE,1.1 Rules.mk,NONE,1.1 Makefile,1.20,1.21 README,1.6,1.7,
David Kimdon <address@hidden> <=