[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: arduino package testing
|
From: |
JohnD |
|
Subject: |
RE: arduino package testing |
|
Date: |
Fri, 26 Apr 2019 15:00:29 -0400 |
From: Doug Stewart [mailto:address@hidden
Sent: Friday, April 26, 2019 1:30 PM
To: JohnD
Cc: Octave Maintainers List
Subject: Re: arduino package testing
On Fri, Apr 26, 2019 at 12:51 PM JohnD <address@hidden> wrote:
Whoops – should be
arduinosetup(‘libraries’, listArduinoLibraries('core'))
the single quotes were still wrong.
arduinosetup('libraries', listArduinoLibraries('core'))
this worked.
I got
Summary:
PASS 135
FAIL 8
--
DAS
--------------------
Can you post the log for which ones failed ?
I usually only see failures when using a board other than the uno, as some of
the tests verify modes set on specific pins such as the i2c and SPI
- arduino package testing, John Donoghue, 2019/04/25
- Re: arduino package testing, Doug Stewart, 2019/04/25
- Re: arduino package testing, Andreas Weber, 2019/04/26
- Re: arduino package testing, Doug Stewart, 2019/04/26
- RE: arduino package testing, JohnD, 2019/04/26
- Re: arduino package testing, John Donoghue, 2019/04/26
- Re: arduino package testing, Doug Stewart, 2019/04/27
- Re: arduino package testing, Doug Stewart, 2019/04/30
- RE: arduino package testing, JohnD, 2019/04/30