monit-general
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Protocol for a SIEVED ?


From: Jorge Bastos
Subject: RE: Protocol for a SIEVED ?
Date: Tue, 11 Nov 2014 13:59:16 -0000

Martin,

I'm providing this info offlist.
Sorry for the DUP's, I had an issue here with outlook :)

> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden On
> Behalf Of Martin Pala
> Sent: terça-feira, 11 de Novembro de 2014 12:31
> To: This is the general mailing list for monit
> Subject: Re: Protocol for a SIEVED ?
> 
> Hi,
> 
> as mentioned, you can use the generic send/expect test:
> http://mmonit.com/monit/documentation/monit.html#GENERIC-SEND-EXPECT
> 
> I can implement native sieve protocol test too ... it would help if you
> can provide access to SIEVE's TCP port, so i can save some time.
> 
> Regards,
> Martin
> 
> 
> > On 11 Nov 2014, at 13:25, Jorge Bastos <address@hidden>
> wrote:
> >
> > Hi Martin,
> >
> > I've confirmed this, when it gets zombie, monit doesn't restart it.
> > The TCP port stays open, but no response is obtained.
> >
> > What can I do to help you on this?
> >
> >> -----Original Message-----
> >> From: address@hidden
> >> [mailto:address@hidden On
> >> Behalf Of Martin Pala
> >> Sent: quinta-feira, 6 de Novembro de 2014 21:59
> >> To: This is the general mailing list for monit
> >> Subject: Re: Protocol for a SIEVED ?
> >>
> >> If the port test succeeded (no errors), then it seems that the port
> >> 2000 is handled by some other process (not sieved), or that the
> >> sieved was able to accept TCP connection and it failed later on
> >> protocol level. Please can you check with which process listens on
> this port?:
> >>
> >>    sudo lsof +c 0 -P -iTCP -sTCP:LISTEN | grep 2000   # the PID will
> >> be in the second column
> >>
> >> vs. the PID of the sieved process:
> >>
> >>    cat /rundbmail/dbmail-timsieved.pid
> >>
> >> If it accepted TCP connection but failed to handle requests, you'll
> >> need to use more specific protocol test ... you can use generic
> >> send/expect
> >> (http://mmonit.com/monit/documentation/monit.html#GENERIC-
> >> SEND-EXPECT) or we can implement native test.
> >>
> >>
> >>
> >>
> >>> On 06 Nov 2014, at 22:40, Jorge Bastos <address@hidden>
> >> wrote:
> >>>
> >>> Martin,
> >>>
> >>> There’s nothing on the logs, only what I show below but because I
> >> killed the process manually,
> >>>
> >>> check process dbmail-timsieved with pidfile /rundbmail/dbmail-
> >> timsieved.pid
> >>>     every 1 cycles
> >>>     group dbmail
> >>>     start program = "/etc/init.d/dbmail-timsieved start"
> >>>     stop  program = "/etc/init.d/dbmail-timsieved stop"
> >>>     if failed port 2000 type tcp with timeout 20 seconds within 1
> >> cycles then restart
> >>>
> >>>
> >>> [WET Nov  6 21:02:34] error    : 'dbmail-timsieved' process is not
> >> running
> >>> [WET Nov  6 21:02:35] info     : 'dbmail-timsieved' trying to
> restart
> >>> [WET Nov  6 21:02:35] info     : 'dbmail-timsieved' start:
> >> /etc/init.d/dbmail-timsieved
> >>> [WET Nov  6 21:03:35] info     : 'dbmail-timsieved' process is
> >> running with pid 31151
> >>>
> >>> From: address@hidden
> >> [mailto:address@hidden On
> >> Behalf Of Martin Pala
> >>> Sent: quinta-feira, 6 de Novembro de 2014 21:16
> >>> To: This is the general mailing list for monit
> >>> Subject: Re: Protocol for a SIEVED ?
> >>>
> >>> Hi,
> >>>
> >>> please can you post snip of the full service check + related monit
> >> log?
> >>>
> >>> Regards,
> >>> Martin
> >>>
> >>>
> >>>> On 06 Nov 2014, at 21:54, Jorge Bastos <address@hidden>
> >> wrote:
> >>>>
> >>>> Hi,
> >>>>
> >>>> Which protocol should i use for a SIEVED server?
> >>>> I’m using it with:
> >>>>
> >>>> if failed port 2000 type tcp with timeout 20 seconds within 1
> >>>> cycles
> >> then restart
> >>>>
> >>>> But it got zombie and monit didn’t restarted it.
> >>>>
> >>>> Thanks,
> >>>> --
> >>>> To unsubscribe:
> >>>> https://lists.nongnu.org/mailman/listinfo/monit-general
> >>>
> >>> --
> >>> To unsubscribe:
> >>> https://lists.nongnu.org/mailman/listinfo/monit-general
> >>
> >>
> >> --
> >> To unsubscribe:
> >> https://lists.nongnu.org/mailman/listinfo/monit-general
> >
> >
> > --
> > To unsubscribe:
> > https://lists.nongnu.org/mailman/listinfo/monit-general
> 
> 
> --
> To unsubscribe:
> https://lists.nongnu.org/mailman/listinfo/monit-general




reply via email to

[Prev in Thread] Current Thread [Next in Thread]