[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [monit] Monit shows wrong process status

From: Martin Pala
Subject: Re: [monit] Monit shows wrong process status
Date: Thu, 17 Sep 2009 08:40:32 +0200

I think it was sufficient to unmonitor and monitor the service which resets the error flag, like this:

  monit unmonitor <servicename>
  monit monitor <servicename>


On Sep 17, 2009, at 8:26 AM, Serge Emantayev wrote:

Hi Martin

Yes, I checked the PID file and it contains the correct process ID.
Unfortunately we cannot upgrade to 5.0.3 due to license limitations. Have you any workaround to reset error flag?


--- On Wed, 9/16/09, Martin Pala <address@hidden> wrote:

From: Martin Pala <address@hidden>
Subject: Re: [monit] Monit shows wrong process status
To: "This is the general mailing list for monit" <address@hidden >
Date: Wednesday, September 16, 2009, 11:32 PM

Does the service's pidfile contain correct PID of the running process?
There were some issues where the error flag was not reset under some circumstances in the past - the latest version is Monit 5.0.3 and there are no known issues.

On Sep 16, 2009, at 2:25 PM, Serge Emantayev wrote:

I noticed that sometimes monit displays a wrong process status (Does not exist) although the process is running. It happens after the process was crashed. If monit is getting reloaded in the same second when it detects the process failure and restarts it, the process status is likely remaining wrong. I have monit version 4.9 for Linux. Is this a known issue? Any workaround or patch?

Thank you
Sergey Emantayev

To unsubscribe:

-----Inline Attachment Follows-----

To unsubscribe:

To unsubscribe:

reply via email to

[Prev in Thread] Current Thread [Next in Thread]