Re: [monit] monit and active/passive

[Martin Pala]

It seems that the configuration has changed probably on the passive host (?). You can try to reload the configuration:

  monit reload

If this won't help, can you send the full configuration file from the passive host?

Thanks,

Martin

On Sep 13, 2009, at 11:00 PM, Frank wrote:

Monit/t says...

Status running

Monitoring mode passive

Monitoring status monitored

 

The dump doesn’t show anything about active/passive

 

Log                = True

 Use syslog         = False

 Is Daemon          = True

 Use process engine = True

 Poll time          = 60 seconds with start delay 0 seconds

 Expect buffer      = 256 bytes

 Event queue        = base directory /var/monit/ with 1000 slots

 

 

Monitoring mode      = active

 

On the working one it says..:

Status running

Mode active

Monitoring status monitored

 

They run same versions

 

From: address@hidden [mailto:address@hidden] On Behalf Of Martin Pala
Sent: September-13-09 4:47 PM
To: This is the general mailing list for monit
Subject: Re: [monit] monit and active/passive

 

Hi,

 

can you run monit like this and check output?:

 

  monit -vIc <pathtomonitconfiguration>

 

It will dump parsed configuration on the beginning.

 

The passive mode means, that the service is monitored, but not restarted ... are you sure it is in passive mode? Isn't it just unmonitored?

 

 

Thanks,

Martin

 

 

On Sep 13, 2009, at 9:32 PM, Frank wrote:

I have 2 exactly same monitrc files..

 

One is active other stays stuck in passive mode...

 

Any idea why ?

 

set daemon 60

set logfile /var/log/monit.log

set mailserver myemaildomain.com

set httpd port 9999

allow 0.0.0.0

allow 127.0.0.1

set eventqueue basedir /var/monit/ slots 1000

#following line has been rewritten for the list ;)

set mmonit http://user:address@hidden:myport/collector

 

# Freeswitch

check process freeswitch with pidfile "/usr/local/freeswitch/log/freeswitch.pid"

 

start program "/usr/bin/screen -d -m /usr/local/freeswitch/bin/freeswitch"

#start program "/usr/bin/screen -S freeswitch -d -m /usr/local/freeswitch/bin/freeswitch -nf"

stop program "/usr/local/freeswitch/bin/freeswitch -stop"

if totalmem > 140.0 MB then alert

if totalmem > 180.0 MB for 3 cycles then restart

# Checks sip port on localhost, not always suitable

# if failed port 5060 type UDP then restart

# Checks mod_event_socket on localhost. Maybe more suitable

#if failed port 8021 type TCP then restart

if 5 restarts within 5 cycles then timeout

alert address@hidden

mode active

 

 

--
To unsubscribe:
http://lists.nongnu.org/mailman/listinfo/monit-general

 

--
To unsubscribe:
http://lists.nongnu.org/mailman/listinfo/monit-general