[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Mibble-users] Functionality of SNMPv3
From: |
Per Cederberg |
Subject: |
Re: [Mibble-users] Functionality of SNMPv3 |
Date: |
Mon, 04 Jul 2005 18:50:48 +0200 |
Hi,
Try using GetNext instead of Get and see what the agent
returns in that case.
Also, the OID specified seems wrong. OID 1.3.6.1.6.3.11.2.1.3
corresponds to "snmpUnknownPDUHandlers" in SNMP-MPD-MIB. The
"sysName" field in SNMPv2-MIB instead has OID 1.3.6.1.2.1.1.5.
Cheers,
/Per
On mon, 2005-07-04 at 15:14 +0100, Bubul Ghoshal wrote:
> Hi,
> I just wanted to test the working of SNMPv3. So i chose Mibble MIB
> Browser. I did the following settings
> Host IP Address : 172.16.2.112
> Port Number : 161
> UserName : ss
> Authentication : None
> Privacy : None
> Context Name :
> Context Engine :
> When i tried to get the value for "sysName", the OID value was
> changed to 1.3.6.1.6.3.11.2.1.3.0 and i got a value 6441 as shown in
> the output
> GET: 1.3.6.1.6.3.11.2.1.3.0: 6441
> But when i performed the same operation for the same configuration
> using some othe MIB Browser i got the correct result for SNMPv3. Can
> any one sugest where am i going wrong and the ways to get values for
> SNMPv3 compatible devices using Mibble MIB Browser.
>
> Thanks and Regards,
> Bubul.