[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: lynx-dev lynx2.8.2pre.11
From: |
dickey |
Subject: |
Re: lynx-dev lynx2.8.2pre.11 |
Date: |
Tue, 1 Jun 1999 20:27:04 -0400 (EDT) |
>
> On Tue, 1 Jun 1999 address@hidden wrote:
>
> > David Eaton had some unresolved problem building (possibly with the
> > cfg_defs.sh script). Aside from that, there's no remaining work to be
> > done for 2.8.2
>
> Whatever it was causing my problem on an earlier 2.8.2preX build, it
> evidently has been fixed now. lynx2.8.2pre.11 built and ran for me OK on
> all the following OS/hardware combinations:
>
> o HP-UX 10.20 / hppa1.1
> o HP-UX 10.20 / hppa1.1
> o HP-UX 11.00 / hppa2.0
> (both native hppa2.0 and with CFLAGS="+DA1.1 +DS2.0" so it would run
> on earlier hppa1.x architectures as well)
> o HP/Apollo Domain/OS 10.4.1.2 / m68k
> (with the usual bunch of compiler warnings, but it works)
I might be interested in the compiler warnings
> Thanks for all the fixes.
no problem
> BTW, I build all my packages using the "/opt/packagename/*" convention.
> I think the only code change still needed in lynx to conform to this is
> the /usr/local/lib/rn/server definition. It would be nice if this could be
> changed more easily (maybe in lynx.cfg) at some future rev.
ok - I'm a little unclear on which definition should be changed though.
> Regards,
> Dave Eaton
> --
> Artronic Development - Your Web Site Solution
> 12629 N. Tatum Blvd., Suite 224; Phoenix, AZ 85032
> e-mail: address@hidden - voice: (602) 953-0336 - http://www.arde.com
--
Thomas E. Dickey
address@hidden
http://www.clark.net/pub/dickey