[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [lwip-users] Modbus TCP client and HTTP server at the same time
From: |
Dan Sexton |
Subject: |
Re: [lwip-users] Modbus TCP client and HTTP server at the same time |
Date: |
Sat, 21 Dec 2019 06:11:17 -0500 |
I use an STM32F407 and LWIP and support a Modbus TCP client and Web Server
simultaneously as well as an MQTT server. I suspect you have a configuration
issue. Check to see the number of Sockets LWIP is configured to support. In my
configuration I am very resource constrained and had to construct my web pages
to not make a lot of simultaneous requests.
Sent from my iPhone
> On Dec 21, 2019, at 5:07 AM, MrFord <address@hidden> wrote:
>
> Hi everyone. I have stm32f767zi and the lwip / socket library. I have a task.
> The first is to read data from the device via modbus TCP. The second is data
> output to a web browser. That is, the tcp client and the tcp server must be
> running on the device at the same time. The problem is that when they work
> in parallel, only the tcp server works, and the client just does not work.
> Also tried to rewrite the code on the lwip / raw and lwip / netconn library.
> Has anyone encountered this problem and how to solve it? Thanks in advance!
>
>
>
> --
> Sent from: http://lwip.100.n7.nabble.com/lwip-users-f3.html
>
> _______________________________________________
> lwip-users mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/lwip-users