Re: [lwip-users] LwIP V1.3.2 + FreeRTOS V8.2.1 + STM32F107 strange failure

[Noam Weissman]

Hi,

I have not worked with 107 but I did work with 207/407 etc...

As far as I remember I had no real problems switching from Lwip 1.32 to 1.41 
Simply try to create a project that is working with 1.32 and replace all 
the LwIP files with the ones from 1.41

Start with this and see if it works for you.

Good luck,
Noam.


________________________________________
From: address@hidden <address@hidden> on behalf of oscargomezf <address@hidden>
Sent: Monday, January 18, 2016 4:15 PM
To: address@hidden
Subject: Re: [lwip-users] LwIP V1.3.2 + FreeRTOS V8.2.1 + STM32F107 strange     
failure

Hi Sergio,

First of all, thank you very much for trying to help me.

I can use one UART for debugging, but I don't know how to tell to LwIp that
the UART 1 is the one I want to use for debugging.

I'm using LwIP v1.3.2 because I can't find how to port LwIP v1.4.1 for using
with SMT32F107. I found an example of LwIP v1.3.1 working with ST32F107 +
FreeRTOS v8.2, and It was very easy for me to port from LwIP v1.3.1 to
v1.3.2. Do you know where can I find the LwIP v1.4.1 ready to work with the
STM32F107?

Best regards.



--
View this message in context: 
http://lwip.100.n7.nabble.com/LwIP-V1-3-2-FreeRTOS-V8-2-1-STM32F107-strange-failure-tp25571p25597.html
Sent from the lwip-users mailing list archive at Nabble.com.

_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users