thanks a lot for the reply.
Now im able to run the simhost application
and ping it from another terminal window. But my curiosity has put me
into doubt again. I opened another window and did a ifconfig to view the
stats and to my suprise saw that the bytes received is 0 for the tap0 device.
But it keeps on increasing for the loopback address. Is this a normal response
or is it indicating another problem(Im not that strong with networking
concept)
Regards,
Deepak Gopalakrishnan
Jeff Barber <address@hidden>
05/04/2009 06:47 PM
To
Mailing list for lwIP users <address@hidden>,
address@hidden
cc
Subject
Re: [lwip-users] lwip on linux(ubuntu
8.04)
The MAC address you're seeing is being created by
the kernel tap
interface each time you bring simhost up. If this is your machine
before you run simhost (use a fixed width font for best results):
tap0 has the "gateway" address you specified on the simhost command
line (192.168.0.1 by default), the primary IP address specified is the
address of the simulated lwip host (192.168.0.2 by default).
If you use the "-p xx.xx.xx.xx" option, you're pinging out from
within
the lwip host. So the only thing you can really ping is the tap0
"gateway" address (although due to linux idiosyncrasies, it also
lets
you ping local interface addresses like the one attached to eth0).
Several things you can try:
Bring up the simhost program (as root). (For example, "sudo
./simhost")
Then from another shell window, you can ping the lwip simulation with
"ping 192.168.0.2".
You can also telnet to it with "telnet 192.168.0.2" (note that
you do
not get a bash shell, you get a limited shell implemented entirely
within the 'fake' lwip host).
Finally, if you have a web browser, you can connect to
http://192.168.0.2 which connects you to the web server implemented
inside the lwip host.
Jeff
On Mon, May 4, 2009 at 7:52 AM, Deepak Gopalakrishnan
<address@hidden> wrote:
>
> yes as you have mentioned there is a entry file for the examples provided
for
> unix port.
> contrib/ports/unix/proj/unixsim/simhost.c
>
> but im not sure how to use this application.
> i tried the ping option provided but this is the response i got..
> Using <some addr1> to ping
> Host at <some addr2> mask <some addr3> gateway <some
addr4>
> System initialized
> TCP/IP initializes
> sending ping
> Applications started
>
> How can i find out if this is working?
> yes im breaking my head to find out where the MAC address is being
set cause
> im getting a new MAC address each time i run this application...did
you find
> a solution to get around this problem..?
>
> --
> View this message in context: http://www.nabble.com/lwip-on-linux%28ubuntu-8.04%29-tp23363680p23366704.html
> Sent from the lwip-users mailing list archive at Nabble.com.
>
>
>
> _______________________________________________
> lwip-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/lwip-users
>