[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lwip-users] best approach to lwip using FreeRTOS
From: |
Sergio Sider |
Subject: |
[lwip-users] best approach to lwip using FreeRTOS |
Date: |
Fri, 13 Mar 2009 09:01:00 -0300 |
Hi guys,
I posted this message on the FreeRTOS list and they suggested me to
post it here...
here it goes:
Hi all,
I need an opinion:
I am used to lwip raw interface, and like it´s simplicity and callback
approach.
For years, I was using in my embedded programs, a simple cooperative
"multitasking" interface, where I call all tasks sequentially in the
main loop, using a simple ticker.
I am now starting to try FreeRTOS...
What´s the best way to use lwip ?
Continue to use raw api (I suppose I have to do it inside one single
task)? or start using netcon to take advantage of the multitasking?
I know the answer might depend on the complexity of my design, but is
one approach way better than the other so I just should not think
about it ?
Thanks for any advice!
Sergio P. Sider
- [lwip-users] best approach to lwip using FreeRTOS,
Sergio Sider <=
- Re: [lwip-users] best approach to lwip using FreeRTOS, Francois Bouchard, 2009/03/13
- Re: [lwip-users] best approach to lwip using FreeRTOS, Sergio Sider, 2009/03/13
- Re: [lwip-users] best approach to lwip using FreeRTOS, Francois Bouchard, 2009/03/13
- Re: [lwip-users] best approach to lwip using FreeRTOS, Sergio Sider, 2009/03/13
- Re: [lwip-users] best approach to lwip using FreeRTOS, Kieran Mansley, 2009/03/13
- RE: [lwip-users] best approach to lwip using FreeRTOS, Bill Auerbach, 2009/03/13
- Re: [lwip-users] best approach to lwip using FreeRTOS, Alain M., 2009/03/13
- RE: [lwip-users] best approach to lwip using FreeRTOS, FreeRTOS info, 2009/03/13
- Re: [lwip-users] best approach to lwip using FreeRTOS, Sergio Sider, 2009/03/14