lwip-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [lwip-users] How can I use "lwip" to build up a tcp-client?


From: Daniel Klingler
Subject: AW: [lwip-users] How can I use "lwip" to build up a tcp-client?
Date: Mon, 22 Aug 2005 07:19:58 +0200

Hello Sathya,

one thing is realized: On this PPC a tcp-server was built. This server is
working trouble-free. I use this server to receive settings from an other
CPU.

Now I want to build up a tcp-client on the same PPC. The client and server
shall work independent. This client shall stream dates (I thing I will store
a block of dates and send this on block, about 1024*16 Bit).

We used this server-echo example of Xilinx and modified it for our
application. Here is used the 'plb-ethernet' HW-Version 1.01.a. It is slave
on the plb bus where PPC is the master. You will find the instructions for
the PPC which we use in the answer to Alberto.

If you neet some more information to help me on this problem then ask again,
thank you!

Regards
Daniel

---------------------------------
TES Electronic Engineering GmbH
Daniel Klingler, Dipl.-Ing.
Consultant Digital Design

Zettachring 8
70567 Stuttgart
Tel.: 0711/7287 7450
Fax:  0711/7287 7451
address@hidden
www.tesbv.com
---------------------------------


> -----Urspr√ľngliche Nachricht-----
> Von: address@hidden [mailto:lwip-
> address@hidden Im Auftrag von Sathya
> Thammanur
> Gesendet: Freitag, 19. August 2005 21:50
> An: Mailing list for lwIP users
> Betreff: Re: [lwip-users] How can I use "lwip" to build up a tcp-client?
> 
> Hil Daniel,
> Can you give information on what exactly are you trying to build? lwIP
> library can be built within Xilinx's Embedded Development Kit. Are you
> trying to use lwIP library as a server on 1 of the PPC and as a client
> on the other and have them talk to each other? What is your setup and
> what is the goal?
> 
> I can try to answer your questions based on your test setup.
> 
> Sathya
> 
> 
> On 8/18/05, Daniel Klingler <address@hidden> wrote:
> > Hello!
> >
> > I do not found how I can use your library to build up a tcp-client. Or
> isn't
> > it possible?
> >
> > We use this library to set up a PowerPC in a Xilinx FPGA.
> >
> > Great thanks in advance!
> >
> > Kind regards,
> > Daniel Klingler
> >
> > ---------------------------------
> > TES Electronic Engineering GmbH
> > Daniel Klingler, Dipl.-Ing.
> > Consultant Digital Design
> >
> > Zettachring 8
> > 70567 Stuttgart
> > Tel.: 0711/7287 7450
> > Fax:  0711/7287 7451
> > address@hidden
> > www.tesbv.com
> > ---------------------------------
> >





reply via email to

[Prev in Thread] Current Thread [Next in Thread]