[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [lwip-users] lwip on spartan3

From: Sathya Thammanur
Subject: Re: [lwip-users] lwip on spartan3
Date: Tue, 1 Mar 2005 23:03:48 -0800

Hi Adrian,
As far as I know there is no lwIP based example working on Spartan-3
board. This should not be different from the V2Pro Appnote. If you
have the right pin mapping of the ethernet module to the board, then
the appnote (xapp663) design can be used as is with just the UCF file


On Tue, 01 Mar 2005 09:15:53 +0100, Pepe Prisas <address@hidden> wrote:
> Hi there,
> I am trying to design a network application on a Spartan 3 Starter Board
> with an ethernet module incorporated using lwIP.
> In the past I have managed to run network applications on Virtex II Pro
> boards based on xilinx application note xapp663.pdf "TCP/IP on Virtex-II
> Pro Devices Using lwIP".
> I would like to ask if anybody has succesfully used lwIP on a Spartan 3
>  board and if there is any application note from xilinx on this respect
> or any information that could be of any interest.
> Thankyou,
> Adrian.
> _______________________________________________
> lwip-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/lwip-users

reply via email to

[Prev in Thread] Current Thread [Next in Thread]