[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[lwip-devel] [bug #31828] lwIP AUTOIP addresses accessed from a host wit

From: Bill Auerbach
Subject: [lwip-devel] [bug #31828] lwIP AUTOIP addresses accessed from a host with a non-AUTOIP
Date: Thu, 09 Dec 2010 14:46:34 +0000
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv: Gecko/20101026 Firefox/3.6.12 ( .NET CLR 3.5.30729; .NET4.0E)

Follow-up Comment #2, bug #31828 (project lwip):



With ping /t running I get no replies - WireShark shows the
correct ICMP packet going out on  If I unplug the cable and
plug in a cable to a NIC which I also enable (it was disabled prior) at:

It will ping.  If I disable that NIC and go back to the other, the pings
stop.  I know it won't work if both NICs are enabled and one is AutoIP and the
other isn't and the lwIP device is on the non-AutoIP NIC.  I'm not talking
about that case.  Win32 always routes to the AutoIp NIC (as it should).  When
that NIC is disabled, it then routes to the other (and only) NIC.


Reply to this item at:


  Message sent via/by Savannah

reply via email to

[Prev in Thread] Current Thread [Next in Thread]