[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Ltib] DirectFB Example Project for LTIB
From: |
Stuart Hughes |
Subject: |
Re: [Ltib] DirectFB Example Project for LTIB |
Date: |
Tue, 01 Mar 2011 06:48:46 +0000 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.13) Gecko/20101208 Lightning/1.0b2 Thunderbird/3.1.7 |
Hi Jeremy,
Glad it's working. Thanks for letting the list know the details.
Regards, Stuart
On 01/03/11 02:15, Jeremy Wood wrote:
> Stuart,
>
> I finally got a simple directfb project to build and run. Trying to use
> the DirectFB-examples as an example project was a mistake, because the
> build process in it is a bit too complicated for me.
>
> I It turns out that all that needed to be added to the helloworld
> makefile was to put the pkg-config directfb calls in the appropriate
> areas. Here are the two lines in the helloworld makefile that needed to
> be changed:
>
> CFLAGS = -g -Wall -O2 -MD `pkg-config --cflags directfb`
>
> - and -
>
> LDFLAGS = -g -Wall -O2 `pkg-config --libs directfb`
>
> I figured this out by combining the helloworld files, and some very
> simple directfb makefiles I found elsewhere—just not for ltib, naturally.
>
> Thank you,
>
> Jeremy
>> Stuart Hughes <mailto:address@hidden>
>> February 26, 2011 6:15 AM
>>
>>
>> Hi Jeremy,
>>
>> The DirectFB examples are available in LTIB if you run ./ltib -m config
>> and select them.
>>
>> If you're asking about what all the stuff in
>> dist/lfs-5.1/DirectFB/DirectFB-examples.spec
>> is all about. Then a good starting point for .spec files for LTIB is to
>> look at dist/lfs-5.1/helloworld/helloworld.spec
>>
>> There is also some info in the FAQ online as well as some hints in the
>> files in the doc directory of the LTIB distro.
>>
>> For a general reference to rpms, take a look at the Maximum RPM book,
>> which is online.
>>
>> Some of the entries in the LTIB .spec files may look a bit weird. This
>> is a function of cross compiling and safety for the most part. If
>> there's anything in the helloworld.spec that you can't understand, feel
>> free to ask.
>>
>> Regards, Stuart
>> Jeremy Wood <mailto:address@hidden>
>> February 25, 2011 4:34 PM
>>
>>
>> I'm having a hard time bridging the gap over to LTIB with a DirectFB
>> project.
>>
>> Does anybody have a simple spec file, package, etc for LTIB that I
>> could use as a starting point? Trying to tease apart the way that the
>> directfb examples are built is beyond my makefile (etc) knowledge.
>>
>> TIA,
>>
>> Jeremy
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Ltib] DirectFB Example Project for LTIB,
Stuart Hughes <=