RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at ./ltib line599.

[Sesto, Vin]

Hi Stuart

I am going to try this ASAP.

Let me back up here for a second. My main goal is to get a rootfs and a
native gcc built using LTIB. How should I go about doing this.

Please tell me if my logic is in error below.

1. Get the CVS fix you mentioned below
2. Run LTIB
3. This produces a gcc that runs on intel platform which generates ARM
instructions.
4. This also produces a rootfs and a linux kernel image.
5. Next, I want to create a native gcc for the iMX31. How do I achieve
this? I thought I could run ./ltib --configure and select gcc and other
necessary libs (ie, binutils etc) and it would produce a native ARM gcc.
I guess one thing I should be sure to do is to make the cross-compiled
gcc be first in my PATH ...

Does this sound like the correct approach?

Thanks.

Vin


-----Original Message-----
From: Stuart Hughes [mailto:address@hidden 
Sent: Friday, December 08, 2006 6:03 AM
To: Sesto, Vin
Cc: address@hidden
Subject: Re: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at ./ltib
line599.

Hi Vin,

This patch got pushed out today, so it's now available.  If you try
again the kernel should build.

Why do you need to build gcc-4.1.1? there is a toolchain already
available for this BSP ("ARM gcc-4.1.1,VFP,gnueabi/glibc-2.4-nptl-3"),
and it has had some testing.

Regards, Stuart

On Thu, 2006-12-07 at 10:12 -0500, Sesto, Vin wrote:
> Hello
> 
>  
> 
> I have just updated my LTIB from CVS and got this error.
> 
>  
> 
> Can?t get: linux-2.6.16-mx31-sdio.patch at ./ltib line 599.
> 
>  
> 
> I am trying to build for an MX31 with eabi / nptl support.
> 
>  
> 
> I need to be able to build gcc 4.1.1 for this target, however, I can?t
> even build without making any changes before even attempting that
> feat!
> 
>  
> 
> Thanks.
> 
>  
> 
> V
> 
> 
> _______________________________________________
> LTIB home page: http://bitshrine.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib