[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: HP4000
From: |
Robert Valliant |
Subject: |
Re: HP4000 |
Date: |
Wed, 10 Feb 1999 14:42:14 -1000 |
On Tue, 9 Feb 1999, Peter Samuel wrote:
> > Do you think 8 MB is too little based on what you know of the prepend
> > files?
>
> Could be a little on the low side. Did you try converting to PCL
> first? I'd expect the PCL to perform without any errors as extraneous
> PostScript code will have been expunged by ghostscript in the PS to
> PCL conversion.
>
> If you don;t want to go to the trouble of setting up another print
> queue use this
>
> gs -sDEVICE=ljet4 -q -dNOPAUSE -sOutputFile="| lpr -Php4000" \
> your_file.ps -c quit
I did indeed print the file with no problems with the above command line
ghostscript.
It even printed a second sheet telling me who had printed it.
So I will try to investigate further. Thanks for everyone's suggestions.
Robert Valliant
Director, Center for Russia in Asia
University of Hawaii at Manoa
address@hidden www.hawaii.edu/shaps/russia
- HP4000, Jeff Kingston, 1999/02/08