linphone-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linphone-users] ortp-message-Setting DSCP to 0 for video stream


From: Anson Tai
Subject: [Linphone-users] ortp-message-Setting DSCP to 0 for video stream
Date: Wed, 22 Oct 2014 11:34:19 +0800


Dear All:
   I am using TI DM36x series,  DSP based , ported with v4l2.

  but still can't get the video.

  there has some log here.
....
  -->ortp-message-Setting DSCP to 0 for video stream
....


Details:

linphonec> call 1002
ortp-message-Flattened number is '1002'
ortp-message-Call 0x45558: moving from state LinphoneCallIdle to LinphoneCallOutgoingInit
Establishing call id to sip:address@hidden, assigned id 1
ortp-message-Contact has been fixed using proxy
ortp-message-Setting DSCP to 46 for audio stream.
ortp-warning-cannot set noise gate mode to [0] because no volume send
ortp-message-Setting DSCP to 0 for video stream.
ortp-message-ms_filter_link: MSRtpRecv:0x55178,0-->MSVoidSink:0x52a40,0
ortp-message-Priority used: 99
ortp-message-Audio MSTicker priority set to SCHED_FIFO and value (99)
ortp-message-[sip:address@hidden calling [sip:address@hidden on op [0x4ab30]
ortp-message-Changing [client] [INVITE] transaction [0x55d80], from state [INIT] to [CALLING]
ortp-message-channel [0x31dd0]: message sent to [UDP://xxx.xxx.xxx:5060], size: [967] bytes


Do I need to use the v4l2-ctl to reconfig the /dev/video0 ? 
my camera is 5M resolution. 


Thanks you

BRs

--

Office: +886.82812597  Mobile: +886 986-154449

   Mail: address@hidden

  MoGaMe Mobile Entertainment Co., Ltd. | www.mogame.com.tw | http://android-javatai.blogspot.com/ 

reply via email to

[Prev in Thread] Current Thread [Next in Thread]