[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Linphone-users] Help with configuration

From: Bryant Bunderson
Subject: Re: [Linphone-users] Help with configuration
Date: Fri, 18 Jul 2014 18:19:22 +0000

Thank you for the response. The creds I used are randomly generated and shouldn’t be valid. I have looked at site similar to the one you mentioned but I haven’t found one that shows how to use both a User ID  and an Authorization Name too. Does Linphone support that?

From: Lorrin <address@hidden>
Reply-To: "address@hidden" <address@hidden>
Date: Thursday, July 17, 2014 at 11:57 PM
To: "address@hidden" <address@hidden>
Subject: Re: [Linphone-users] Help with configuration

A quick warning first, never post your actual password public like this! This should be quite obvious. Unless its a dummy password. If not, quickly go and change it asap.

As for the actual question, a quick Google search revels plenty of information like this:


On 18.07.2014 00:08, Bryant Bunderson wrote:

I want to use LinPhone with my SIP provider Megapath but I don’t know how to configure the account. This is how I configure the account in Bria.

User ID: 123456_1234567890_7890
Password: ZXspFsRUK8ub56v6
Display name: Megapath
Authorization name: 1234567890
Register with domain and receive calls: checked
Send outbound via: Proxy
Proxy address:

When I configure Linphone, I don’t know where to set the Authorization name. Thanks in advance for any help.

Linphone-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]